Member Since: 07 Jul 2018
Location: Wiltshire
Posts: 143
Lard’s disco 3
A proud new owner - After a week of ownership, the immediate issues sorted I’m building up for some mods
I managed to buy a 2008 tdv6 SE from a friend in the trade who bought it to use on a euro trip - was after a HSE but this is a 100k mile SE that had been highly specced and was in great condition, with good service history and only 2 owners - it helped that it was also a lovely colour 😁
So far:
IIDTool purchased - 4x4 info/ off road nav enabled
Replaced sticking rear Caliper
Replaced noisy tensioner and aux belt
Had cam belt done before purchase and expansion bottle
Had replacement door lock mechanism
to do:
Currently on order are
rear parcel shelf
cubby fridge
I'm a sucker for preventative maintenance (maybe because I had a P38 previously ) so if there's anything obvious that's worth doing then shout and I'll add it to the list
Last edited by lard on 17th Jul 2018 10:06 pm. Edited 1 time in total
17th Jul 2018 9:56 pm
lard
Member Since: 07 Jul 2018
Location: Wiltshire
Posts: 143
oh - if it helps I used "breaker link" to get the cubby fridge - £95 delivered and specified a D3 model vehicle so fingers crossed it will be a good fit, could only find D4 ones on ebay - also managed to get a beige parcel shelf so again.... if they both turn out to be what I asked for then a result as the fridge comes with 3 months warranty!
17th Jul 2018 10:04 pm
lard
Member Since: 07 Jul 2018
Location: Wiltshire
Posts: 143
gutted - parcelfarce lost both items between me and the breaker
To be fair renparts (the breaker) refunded me without any nonsense so back on the lookout for a D3 cubby fridge and a parcel shelf!
any pointers to whether the parcel shelf would have been black or beige as standard with my interior?
1st Aug 2018 11:36 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4626
Nice looking motor! Vert best of luck with it
Oh and welcome to the club
Nice looking car, so you'll want to hang on to it.
Not being pessimistic but … top of your shopping list should be :
RLD spare wheel protector
Disklok or similar
as it's a D3 and not a 4, trigger the alarm.
if it sounds like a crap house alarm that's on it's last legs and several streets away you can disconnect the sounder (in the "second battery box" under bonnet on drivers side) and it will switch to using the horns instead..
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
2nd Aug 2018 5:53 am
lard
Member Since: 07 Jul 2018
Location: Wiltshire
Posts: 143
Can't believe it's been a year already - have been very happy with the Disco - maintenance wise in addition to the earlier work:
New tyres - Grabbers
handbrake shoes, discs & pads all round
The other rear caliper
both EGR valves
MAP cleanout
2 x new batteries (Bosch lasted about 8 months!!)
Service (oil, oil filter, fuel filter, air filter)
LED bulbs (main and side lights)
Expansion bottle (low coolant warning)
Rear prop shaft bearing
Mods:
Remote FBH + SMS tracker device
Blackvue front & rear dash cam & battery pack
Centre console fridge
window deflectors
I'm averaging 29 MPG on a steady commute - have put 27K miles on it over the last year
Only issue has been limp mode (new battery sorted that) and EGR's went south
I've still got an annoyance of having to push the gearshift forward in park to get the key out, but that's not too annoying - have taken it off road a couple of times (tame green lanes - still managed to scratch it!)
The snow was good fun, managed to rescue a shogun from a field, once in normal mode, then second time I buried it trying to tow it out of 4ft snow, into low range and it pulled like it wasn't connected! Also towed an Ikea truck out of an icy road, so it's been outstanding for what I wanted it for"
Mods wise I'd like to fit a rear view camera - Awesome vehicle, still make any excuse to drive it!
Plans are to start refreshing some of the steering/suspension components on the front
Last edited by lard on 10th Aug 2019 1:26 am. Edited 2 times in total
Happy anniversary MY16 D4 Landmark SDV6 (The Ice Maiden)
Uncle Ray's spare wheel protector
MY08 D3 HSE Stornoway (Miss Moneypit) The money tree withered......
10th Aug 2019 1:19 am
Stevepd
Member Since: 06 Mar 2018
Location: Wiltshire
Posts: 391
That’s a good looking car and a great plate.
Steve.
10th Aug 2019 7:07 am
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2459
Have you tried taking the gearbox linkage off the gearbox and cleaning it up or replacing it, they have a habit of rusting up.
Its a very easy repair and would hopefully repair your gear stick issue
10th Aug 2019 7:52 am
yogi972
Member Since: 05 Jun 2011
Location: Kineton
Posts: 3372
I have a parcelshelf 👍🏼😉
10th Aug 2019 8:37 am
ANother
Member Since: 28 Jul 2018
Location: None
Posts: 179
lard wrote:
Nice looking spot to have a picnic where is this ?
Nice looking motor too just reached first year anniversary as well. Retro fitted
Heated seats. heated screen, F&R Parking sensors, auto wipers, auto lights, full leather. front fogs, D4 heated steering wheel, airbag and switches, Brembo RRS 4 pots and discs, Dave's aftermarket sat nav install, Aftermarket head unit, Rear parking cam, Powerful UK grill replacement, De-tangoed and painted head lights.
EGR Blanked oil pump & cam belts changed
When you had the cambelts done was the Oil pump checked/changed to make sure it has the latest one fitted.?. If not I would be worried about it failing after the belt change.
Flack
13th Aug 2019 10:10 am
lard
Member Since: 07 Jul 2018
Location: Wiltshire
Posts: 143
yogi972 wrote:
I have a parcelshelf 👍🏼😉
pants how did i miss this? Still need one!
Thanks for the pointers... i don't think it did have the new oil pump at same time as belts.... on the list for the service coming up thanks!
25th Mar 2020 10:52 pm
lard
Member Since: 07 Jul 2018
Location: Wiltshire
Posts: 143
So update to work done so far:
Bodsy came and flushed my gearbox, transfer case and changed oils in diffs!
I've replaced both EGR valves... then had one go again so call to Bodsy and EGR delete and software update done
Also sorted out the lights - went with LED's for the dipped beam, but got flashed by a few folks and did the sensible thing and removed them, more research and plumped up for the hids4u H7R conversion and really pleased! LED's now in the main beams and really pleased with the clean front end!
Also fitted the ebay bargain LED bar - piccies below!
Click image to enlarge
25th Mar 2020 11:00 pm
Attodisco3
Member Since: 07 Jan 2020
Location: Sevenoaks
Posts: 60
Can you post a step by step for fitting the sunbeam in the grille?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
) so if there's anything obvious that's worth doing then shout and I'll add it to the list 
