Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Faults & Fixes (D3)

Mutliple faults lit up the dashboard
Post Reply  Down to end
Page 1 of 15 123 ... 131415>
slrk1725
 


Member Since: 01 Aug 2010
Location: Stockholm
Posts: 29

Sweden 2014 Discovery 4 3.0 SDV6 HSE Auto Stornoway GreyDiscovery 4
Mutliple faults lit up the dashboard

Hi
after one week of happy D3 ownership the car broke down yesterday. I did an enginge spray/clean with the Kaercher power washer 4 hours earlier but was careful not to spray on any connections. When searching for fault I blowed everything with compressed air but no change in "error" behaviour.

Transmission fault
HDC fault
Electric Hand Brake fault
Reduced traction
Terrain response system unavailable
and so on...all types of warning lights on the dash - looking like a US christmas tree (no offense)

No gears will engage - the dash indicates a F where the number ususally shows up (in sport mode)

Anyway is there a standard check to do for major electrickery faults like this. Ordered a BAS remap/fault code reader from Pete last week hopefully it is in the mail today or tomorrow.

The car is TDV6 2007, HSE auto..... btw


Edit: bad manners - I forgot my name

thanks in advance

Fredrik
  
Post #6810859th Aug 2010 12:38 pm
View user's profile Send private message View poster's gallery Reply with quote
slrk1725
 


Member Since: 01 Aug 2010
Location: Stockholm
Posts: 29

Sweden 2014 Discovery 4 3.0 SDV6 HSE Auto Stornoway GreyDiscovery 4

These are the fault codes that BAS Remap ninterface picked up

P0850
P1623
U0002
U0073
U0101
U0102
U0121
U0128
U0138
U0151
U0155
U0164
U0416
U0416

Any alarming ones? I tried the search function and the ones I found was all communication errors

Fredrik
  
Post #6812359th Aug 2010 8:20 pm
View user's profile Send private message View poster's gallery Reply with quote
DSL
Keeper of the wheelie bin 


Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72740

Ukraine 

Engine spraying's not a good idea with D3s, it can result in what you've had! I'm a non techie dude so no idea if just needs to dry out or not.

Edit: welcome Fredrik, somebody should be able to help you with those codes. Thumbs Up
   
Post #6812409th Aug 2010 8:24 pm
View user's profile Send private message View poster's gallery Reply with quote
The Transformer
 


Member Since: 22 Jan 2010
Location: Leicestershire
Posts: 1791

England 2010 Discovery 4 3.0 TDV6 HSE Auto Nara BronzeDiscovery 4

Try a hard reset? see the wiki for how to Thumbs Up
  
Post #6812509th Aug 2010 8:43 pm
View user's profile Send private message View poster's gallery Reply with quote
grzesiul
 


Member Since: 11 May 2008
Location: UK
Posts: 6265

Poland 2016 Discovery 4 3.0 SDV6 SE Auto Loire BlueDiscovery 4

http://www.equus.com/Dtc

try above should give u an idea but hard reset would be the first thing I would have done

rgds
  
Post #6812579th Aug 2010 8:55 pm
View user's profile Send private message View poster's gallery Reply with quote
anglefire
 


Member Since: 09 Mar 2010
Location: In the Club House
Posts: 4180

England 

P0850 seems to be a park neutral error code.
 Mark.
2006, D3 SE Auto - gone but not forgotten.
2014 BMW 530d M Sport Tourer.
1977 Triumph Spitfire 1500

_________________________________________________
Disco Picture Website Here 
 
Post #6812589th Aug 2010 8:58 pm
View user's profile Send private message View poster's gallery Reply with quote
kernowexpeditionaryforce
 


Member Since: 15 Jan 2009
Location: Kernow
Posts: 329

2006 Discovery 3 TDV6 S Auto Buckingham BlueDiscovery 3

any chance you have soaked the modules behind the battery?
  
Post #6812689th Aug 2010 9:09 pm
View user's profile Send private message View poster's gallery Reply with quote
wiggs
 


Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368

United Kingdom 2015 Discovery 4 3.0 SDV6 HSE Auto Fuji WhiteDiscovery 4

Sounds like you have water in the transmission control module behind the battery .

You need to remove it and dry it out ( if your not too late )

The module has waterproof plugs / connectors ...but the main housing is useless ..just a bit of ali wrapped round the box
 G4 Gone ...but not forgotten  
Post #68131610th Aug 2010 5:59 am
View user's profile Send private message View poster's gallery Reply with quote
slrk1725
 


Member Since: 01 Aug 2010
Location: Stockholm
Posts: 29

Sweden 2014 Discovery 4 3.0 SDV6 HSE Auto Stornoway GreyDiscovery 4

Thank you for the advice

Have done a hard reset - no change

No water in the modules behind the battery - not even a trace of it. I removed the battery, charged it with my CTEK charger. Opened all connectors and looked for water but nothing.

The battery seem like it need to be replaced - it is still being charged haven't looked at this morning but it didn't turn green/full after a few hours last night. (I know that my CTEK isn't a fast charger but still)

Unfortunatly my volt meter died so I don't know what juice the battery actually has.

I'll keep you posted and if anybody have another idea - let me know.

Fredrik
  
Post #68131910th Aug 2010 6:12 am
View user's profile Send private message View poster's gallery Reply with quote
slrk1725
 


Member Since: 01 Aug 2010
Location: Stockholm
Posts: 29

Sweden 2014 Discovery 4 3.0 SDV6 HSE Auto Stornoway GreyDiscovery 4

Battery is full this morning - no changes

This is the descriptions of all faults I've found

P0850 Park/Neutral switch stored in the transmission control module
P1623 Immobilisation ECU code storage fault.Last occurrence - signal fault
U0002 High Speed CAN Communication Bus Performance
U0073 Control Module Communication Bus Off
U0101 Lost communication with transmission control module
U0102 Lost communication transfer case module. Bus signal/message failure. Missing a message. Historic.
U0121 Lost Communication With Anti-Lock Brake System (ABS) Control Module
U0128 Recurring fault found in the ABS module which is the EPB one.
U0138 Lost Communication With All Terrain Control Module
U0151 Lost Communication With Restraints Control Module
U0155 Lost communication instrument cluster control module. Bus signal/message failure. Missing a message
U0164 Lost Communication With HVAC Control Module
U0416 Invalid data received from vehicle dynamics control module
U0416 Invalid data received from vehicle dynamics control module
  
Post #68133410th Aug 2010 8:02 am
View user's profile Send private message View poster's gallery Reply with quote
cdodkin
 


Member Since: 18 Aug 2008
Location: Ex Pat Brit in California
Posts: 700

United States 2008 LR3 4.4 V8 SE Auto Chawton WhiteLR3

Sounds just like break switch failure symptoms.

So I'd check the break switch under the dash.

I had the my dash light up, and all the systems shut down, just because of a break switch fault.

Cheap and easy part to replace.

Check your rear brake bulbs first though, as they can also cause the same christmas tree dash effect, and are even cheaper to replace.

Here's how my dash looked!

Click image to enlarge
 08 LR3 SE V8 - 02 D2 SE7 V8
Porsche 911 (03 996) - 2013 MINI Cooper S 
 
Post #68161811th Aug 2010 4:24 am
View user's profile Send private message View poster's gallery Reply with quote
slrk1725
 


Member Since: 01 Aug 2010
Location: Stockholm
Posts: 29

Sweden 2014 Discovery 4 3.0 SDV6 HSE Auto Stornoway GreyDiscovery 4

Hi and thanks for all advice

A stupid question.....if all brake lights lit up when I push the brake pedal can I then rule out a malfunction in that area....and to be very clear by "all brake lights" I mean 3 lights.

My dash looked similar - I'll see if I can post my video recording of all fault messages

Fredrik

EDIT: Youtube link to fault messages http://www.youtube.com/watch?v=ahwUfntSPhM
  
Post #68165511th Aug 2010 8:38 am
View user's profile Send private message View poster's gallery Reply with quote
cdodkin
 


Member Since: 18 Aug 2008
Location: Ex Pat Brit in California
Posts: 700

United States 2008 LR3 4.4 V8 SE Auto Chawton WhiteLR3

Unfortunately bulb activity doesn't guarantee the switch is ok.

For what ever reason, a failure in the brake lamp circuit snowballs into a mass system error on the vehicle.

If you do a few searches on it, you'll find other posts.

There was another forum member with a switch shut down on here just last month.

Certainly worth checking as a possible cause, although ideas around your washing and water ingress are very compelling.

You able to get the vehicle to a dealership or qualified independent service shop?
 08 LR3 SE V8 - 02 D2 SE7 V8
Porsche 911 (03 996) - 2013 MINI Cooper S 
 
Post #68173411th Aug 2010 2:03 pm
View user's profile Send private message View poster's gallery Reply with quote
bellautos
 


Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532

United Kingdom 2010 Discovery 4 3.0 TDV6 SE Auto Santorini BlackDiscovery 4

Did you spray under the front and rear arches also ? UK passanger side behine the arch cover is 3 connectors, and UK passanger side rear wheel arch are 2 bigger connectors. It soungs like a CAN connection fault possibily.

Pete
  
Post #68173611th Aug 2010 2:08 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
slrk1725
 


Member Since: 01 Aug 2010
Location: Stockholm
Posts: 29

Sweden 2014 Discovery 4 3.0 SDV6 HSE Auto Stornoway GreyDiscovery 4

Hi

@Pete - I sprayed the wheel arches.....will check that tomorrow. BTW I will send you my ecu file soon - This issue kind of shifted my focus...

I made a bad decision the other night - I only looked at the outside of the connectors behind the battery. They where dry so I never bothered to remove them and look inside. Today I did and it wasn't pretty.
http://picasaweb.google.se/fredrik.olen/La...7526288114

I clean it with some sort of electrical spray, dried it but still the same errors. The amount of goo there tells me that it wasn't my spray that started it....

As I said no gears will engage and I remembered that there was a loud scraping sound when I select P after trying the other gears. It sound like the noise a bad gear change does with a manual - like syncronisation rings scraping...

I recorded it and will put it on youtube later tonight.

Does anybody have an idea on what the connection in this image is supposed to do - it was disconnected the first time i removed the battery, now I have connected it.

http://picasaweb.google.se/fredrik.olen/La...1787904338

EDIT: spelling....

EDIT 2: Youtube link http://www.youtube.com/watch?v=Nq1wnNtiv5o
Fredrik
 

Last edited by slrk1725 on 11th Aug 2010 9:15 pm. Edited 1 time in total 
Post #68186211th Aug 2010 9:06 pm
View user's profile Send private message View poster's gallery Reply with quote
Display posts from the last:  
Post Reply Back to top
Page 1 of 15 123 ... 131415>
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site