I just bought these on this forum for doing the fan..
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
22nd Jul 2021 1:53 pm
KevinD3
Member Since: 05 Aug 2020
Location: Sutton Coldfield
Posts: 1205
My Wife thinks the D3 is a hobby, The D3 thinks the wife is 💕
22nd Jul 2021 4:55 pm
DN D3 Decade
Member Since: 24 Jun 2006
Location: W.London.
Posts: 2293
Is the 4.4 V8 fan the same as the TDV6 unit ? I have the same type of set as Hardware, essentially a 36 mm ? spanner, and another with appropriate cut out/holes in, to hold the drive hub with. This works (on a TDV6), if you fit them both, and give the spanner a whack ( clockwise to undo) with a big hide faced mallet or similar.D3 owned from new, P017 brake recall, BAS FBHIC, new FBH, LR013487 oil pump, new water pump. RRS front lower suspension arms. New suspension compressor/ relay. New Denso alternator. CuNifer rear brake pipes. New GKN rear propshaft. New HPFP belt & tensioner. New A/C Condenser.NO WARRANTY for many many years.
LR apparently only do 2 nut sizes for the fan ... the double ended one does both..
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
22nd Jul 2021 6:27 pm
DN D3 Decade
Member Since: 24 Jun 2006
Location: W.London.
Posts: 2293
Just measured the spanner open ends, 32mm and 36mm. Endeavour can you measure the fan nut, to see if these will fit ?D3 owned from new, P017 brake recall, BAS FBHIC, new FBH, LR013487 oil pump, new water pump. RRS front lower suspension arms. New suspension compressor/ relay. New Denso alternator. CuNifer rear brake pipes. New GKN rear propshaft. New HPFP belt & tensioner. New A/C Condenser.NO WARRANTY for many many years.
22nd Jul 2021 8:46 pm
kajtzu
Member Since: 11 Aug 2017
Location: Helsinki
Posts: 6568
You will need a 36 mm wrench for the bolt nut on the viscous fan. The special tool just locks the bolts on the water pump in place. You don’t need it if you can lock the bolts with something else... Remember - righty loosey.
(I measured this yesterday on my MY05 D3 V8 )
22nd Jul 2021 10:58 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10361
I removed the bumper and crash bar and did it from the front.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
... All LED interiors lights, DRLs, Spare Wheel protector.
Just measured the spanner open ends, 32mm and 36mm. Endeavour can you measure the fan nut, to see if these will fit ?
