Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Technical (D3)

Suspension Fault
Post Reply  Down to end
Page 1 of 1
JVTCross
 


Member Since: 04 Mar 2021
Location: Northern Ireland
Posts: 11

United Kingdom 2006 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3
Suspension Fault

Hey i was wondering if anyone might have an idea as to what could be up with my suspension?

I bought the Disco 3 back 8 months ago with a suspension fault that only came every week or so and went away again. The previous owner put a new compressor in and it didn't solve the problem. (i have both compressors and they both run fine) It come up on the dash with an orange warning and it says something to the effect off suspension fault, normal ride height only. I cant drop or lower it at all. This is now stuck on all the time. The strange thing it i do a lot of heavy towing and the suspension readjusts the height when weight is added no problem and it never drops air out sitting for a long period of time. The suspension works just fine other than i cant raise or lower it with the switch. I tried grabbing fault codes with my scanner but it didn't get any.

If anyone has any idea what it might be that would be greatly appreciated.
  
Post #222694226th Apr 2021 7:27 pm
View user's profile Send private message View poster's gallery Reply with quote
Sea Raider
 


Member Since: 01 Nov 2016
Location: None
Posts: 4450


What scanner did you use, as the D3 is a fussy bu66er
  
Post #222694326th Apr 2021 7:30 pm
View user's profile Send private message View poster's gallery Reply with quote
Globetrotter448
 


Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1771

Australia 2007 Discovery 3 4.0 V6 Petrol SE Auto Java BlackDiscovery 3

Has anything been spilt on the centre console as the connector underneath it is known to give the odd problem or two
  
Post #22278042nd May 2021 6:47 am
View user's profile Send private message View poster's gallery Reply with quote
aja4x4
 


Member Since: 14 Apr 2019
Location: Westbury
Posts: 2459

United Kingdom 2005 Discovery 3 TDV6 SE Auto Zambezi SilverDiscovery 3

How old is your battery and what is the voltage like after the vehicle has been sitting all night
 Andrew

D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE 
 
Post #22278112nd May 2021 7:13 am
View user's profile Send private message View poster's gallery Reply with quote
JVTCross
 


Member Since: 04 Mar 2021
Location: Northern Ireland
Posts: 11

United Kingdom 2006 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3

Apologies Folks only getting back on the computer now and having time to deal with the Disco. So I used my Carly OBD scanner that I use for my Audi and such. I had the feeling this would only gather Engine ECU Codes so I know it wont be getting the suspension codes I need. I have been looking into getting a diagnostic tool for the Disco. I know about the IID BT tool and in the long run it would save me money but not sure if I want to drop the £400. Does anyone have any cheaper alternatives that will work? Some people have said about the CRP123.

Anyway. The only part off the dash I have had split is around the gear stick. Now that i think about it i should check all the wires to the Suspension switch.

The battery is new a month ago and I know it was weak as I was getting a fault for all the special functions being faulty and hill decent but that issue is sorted now.
  
Post #222939610th May 2021 4:19 pm
View user's profile Send private message View poster's gallery Reply with quote
aja4x4
 


Member Since: 14 Apr 2019
Location: Westbury
Posts: 2459

United Kingdom 2005 Discovery 3 TDV6 SE Auto Zambezi SilverDiscovery 3

The Autel unit is just under £50 use the search fuction for more info
 Andrew

D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE 
 
Post #222940410th May 2021 5:34 pm
View user's profile Send private message View poster's gallery Reply with quote
JVTCross
 


Member Since: 04 Mar 2021
Location: Northern Ireland
Posts: 11

United Kingdom 2006 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3

Thanks for the heads up! just purchased one
  
Post #222942710th May 2021 7:18 pm
View user's profile Send private message View poster's gallery Reply with quote
JVTCross
 


Member Since: 04 Mar 2021
Location: Northern Ireland
Posts: 11

United Kingdom 2006 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3

So got the new reader today and just had a go. There were several codes but i cleared them and the system worked for a couple of seconds and came back with the code C1A08-1C im hoping its as simple as replacing the Air pressure sensor but can anyone tell me where it is located?
  
Post #222997313th May 2021 5:09 pm
View user's profile Send private message View poster's gallery Reply with quote
JVTCross
 


Member Since: 04 Mar 2021
Location: Northern Ireland
Posts: 11

United Kingdom 2006 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3

Got some time today to look at it more. The new pressure sensor didn't solve the problem. I checked the voltage of the yellow and black wire leaving the ecu and it has 4.5v. But at the pressure sensor it's getting 0v im just wondering is this wire supposed to be a direct wire or does it go anywhere else? It looks like I might have a break in the wire?
  
Post #223259026th May 2021 7:39 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site