paulscr
Member Since: 18 Jan 2016
Location: Bath
Posts: 17
  
|
Anyone know where I can get the four bolts that hold the bottom of the bumper on? Noticed three holes are attached using cable ties.
From what I can see - they are torx heads with large washers.
|
 23rd Jan 2016 10:59 pm |
|
|
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3169
|
Land rover themselves or pop down to a local diy store and pick up similar bolts  Discovery 3 se gone
Range rover sport supercharged here:)
|
| 24th Jan 2016 10:00 am |
|
|
Discomadness
Member Since: 19 Jan 2015
Location: Caerphilly
Posts: 2256
|
I noticed mine were missing the other day when I changed my sump. The bolts are M6 the ones I used were 25-30mm long, you'll need some penny washers to go with them. As the holes in the bumper are quite large. Jarrod
Current : D3 2007 HSE - AKA the lemon
-beanie grille
-detango with led bulbs
-club body off rebuild. TWICE.
|
| 24th Jan 2016 10:11 am |
|
|
