Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Technical (D3)

Fault codes. Special functions and no hi/low not working.
Post Reply  Down to end
Page 1 of 2 12>
Day101
 


Member Since: 21 Oct 2019
Location: Herefordshire
Posts: 44

United Kingdom 2006 Discovery 3 TDV6 Base 7 Seat Manual Baltic BlueDiscovery 3
Fault codes. Special functions and no hi/low not working.

Help in the right direction where to start please.








  
Post #223153221st May 2021 9:45 am
View user's profile Send private message View poster's gallery Reply with quote
ofob69
 


Member Since: 06 Oct 2011
Location: Pangbourne
Posts: 61

United Kingdom 2009 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3

Just been there but slightly different codes.

Start with replacing brake switch (yes really, Google it), £10+ and 5 minutes work

Check battery voltage

Check alternator is working correctly

If these don't work then it starts getting more complicated........
  
Post #223168621st May 2021 11:00 pm
View user's profile Send private message View poster's gallery Reply with quote
aja4x4
 


Member Since: 14 Apr 2019
Location: Westbury
Posts: 2459

United Kingdom 2005 Discovery 3 TDV6 SE Auto Zambezi SilverDiscovery 3

Yes the switch is a common problem even if the brake lights work ok as it has two circuits inside.
The other common fault is the brake light bulbs, if a filiment breaks off and touches the other circuit it can confuse the canbus.
 Andrew

D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE 
 
Post #223171122nd May 2021 7:58 am
View user's profile Send private message View poster's gallery Reply with quote
Day101
 


Member Since: 21 Oct 2019
Location: Herefordshire
Posts: 44

United Kingdom 2006 Discovery 3 TDV6 Base 7 Seat Manual Baltic BlueDiscovery 3

Still getting the same issues
New battery
New brake pedal switch

I don’t know where to try next if I’m honest
  
Post #223339831st May 2021 10:05 pm
View user's profile Send private message View poster's gallery Reply with quote
ofob69
 


Member Since: 06 Oct 2011
Location: Pangbourne
Posts: 61

United Kingdom 2009 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3

What symptoms are there on the car or are you just getting fault codes?
  
Post #223340231st May 2021 10:24 pm
View user's profile Send private message View poster's gallery Reply with quote
Day101
 


Member Since: 21 Oct 2019
Location: Herefordshire
Posts: 44

United Kingdom 2006 Discovery 3 TDV6 Base 7 Seat Manual Baltic BlueDiscovery 3

No lights on the special functions and no low range. Dash shows special functions error
  
Post #223340631st May 2021 10:58 pm
View user's profile Send private message View poster's gallery Reply with quote
PROFSR G
 


Member Since: 06 Mar 2017
Location: Lost
Posts: 4693

Ukraine 2009 Discovery 3 TDV6 Commercial XS Auto Stornoway GreyDiscovery 3
Re: Fault codes. Special functions and no hi/low not working.

Day101 wrote:


Click image to enlarge


Check your earth straps (thoroughly) Also, P0562, P1811, and P1807 could indicate water ingress/corrosion at the TCM terminals or one of the plugs on the transfer case.
 yµ (idµ - eAµ) ψ=mψ

 
 
Post #223340931st May 2021 11:23 pm
View user's profile Send private message View poster's gallery Reply with quote
Day101
 


Member Since: 21 Oct 2019
Location: Herefordshire
Posts: 44

United Kingdom 2006 Discovery 3 TDV6 Base 7 Seat Manual Baltic BlueDiscovery 3

Where are the earth straps located?
  
Post #22334131st Jun 2021 6:55 am
View user's profile Send private message View poster's gallery Reply with quote
aja4x4
 


Member Since: 14 Apr 2019
Location: Westbury
Posts: 2459

United Kingdom 2005 Discovery 3 TDV6 SE Auto Zambezi SilverDiscovery 3

check the front engine one located behind the drivers side front wheel arch liner it connects the engine, chassis and body.
there is also another one that connects the transfer case to the chassis
 Andrew

D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE 
 
Post #22334181st Jun 2021 8:10 am
View user's profile Send private message View poster's gallery Reply with quote
Day101
 


Member Since: 21 Oct 2019
Location: Herefordshire
Posts: 44

United Kingdom 2006 Discovery 3 TDV6 Base 7 Seat Manual Baltic BlueDiscovery 3


Any idea what this plug is for as it doesn’t connect anywhere
  
Post #22334541st Jun 2021 10:30 am
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10382

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

That plug is used when the car is new.
It's fine like that


Either water split on the Hi Lo switch or some other fault with it or the wiring.
There are fault codes saying as much
  
Post #22334571st Jun 2021 10:37 am
View user's profile Send private message View poster's gallery Reply with quote
Day101
 


Member Since: 21 Oct 2019
Location: Herefordshire
Posts: 44

United Kingdom 2006 Discovery 3 TDV6 Base 7 Seat Manual Baltic BlueDiscovery 3

is it worth looking for a new switch?
  
Post #22334971st Jun 2021 3:23 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10382

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

It’s all part of the console switch pack.
It’s like a tv remote control if you have ever serviced one of those.
  
Post #22335041st Jun 2021 4:53 pm
View user's profile Send private message View poster's gallery Reply with quote
Day101
 


Member Since: 21 Oct 2019
Location: Herefordshire
Posts: 44

United Kingdom 2006 Discovery 3 TDV6 Base 7 Seat Manual Baltic BlueDiscovery 3

I’ve opened it up and looked at it can see any issues but no lights light up at all on the board apart from the suspension. No water damage only thing I can think off if the kids have stood on that part and broke it
  
Post #22335121st Jun 2021 5:22 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10382

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

clear the faults. See what comes back.

As AJ said, look at the ecu end.
And resistance test the switch wires at the ecu connector if the fault codes are still present
  
Post #22335191st Jun 2021 6:11 pm
View user's profile Send private message View poster's gallery Reply with quote
Display posts from the last:  
Post Reply Back to top
Page 1 of 2 12>
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site