jonnyboy54321
Member Since: 14 Jul 2012
Location: surrey
Posts: 114
  
|
Hi all.
65 plate d4.
Basic spec one.
Two front seat airbags deployed, airbag light on.
Seats can either be replaced or repaired.
I suspect drivers seatbelt pretensioner may require repair/replacement although unsure.
Cant recall any codes on GAP (not bought a licence for this project yet!).
Can i reset the airbag module/crash data?
Or am i better off just replacing it, the pretensioner, and the seats?
Unsure if the modules are locked to the car?
Thanks
|
 15th May 2024 10:24 pm |
|
|
Famousfive
Member Since: 12 Aug 2014
Location: Southampton
Posts: 1811
 
|
modules not locked to car
if seat airbags I would replace whole seats
yes to new seat belt pretensioners
yes to new airbag module that sits under the central console
yes to new dash
reset on CCF
I'd say a nice job to do over a warm weekend 
I did all this on a MY14 D4 and all worked great after  Stolen - D4 Loire Blue
D4 Bali Blue
|
| 15th May 2024 10:49 pm |
|
|
jonnyboy54321
Member Since: 14 Jul 2012
Location: surrey
Posts: 114
|
Thanks for that. What is the ccf reset procedure?
|
| 16th May 2024 9:12 am |
|
|
Famousfive
Member Since: 12 Aug 2014
Location: Southampton
Posts: 1811
|
On the GAP IID (this is from memory) - its Config=> Service->Reset Airbags
Mine showed a failure after doing this and then ping all faults cleared and the dash no longer had the airbag symbol Stolen - D4 Loire Blue
D4 Bali Blue
|
| 16th May 2024 9:53 am |
|
|
