Member Since: 02 Jan 2005
Location: A bit there, a bit over there and sometime at home, France
Posts: 1006
Wiggy Man wrote:
Hi Guys,
Just wanted to pass on my experiences after just finishing the headlight mod. Don't know if i've got more glue or my hairdryer is underpowered but it wasn't coming apart, i ended up having to use a heat gun.
My disco is silver and i decided to have the amber strips in the lights but i snapped the first one which i glued back together then tried the second one with more heat and it snapped into three pieces.
So if you attempt the mod just be prepared that you may have to go for the completely silver look. I think it looks better than it did with no orange but If anyone has the orange reflectors that the don't want, please PM me.
Thanks for the feedback
Bear in mind many "full silver" style owners may have the complete orange trim collecting dust, ideal for a fellow unlucky member...
Just ask and you shall receive l=Oo\________/oO=l l:Ool======loO:l
Current
RANGE ROVER Vogue 4.4L TDV8 - 2012 - Orkney Grey, on Black, on Piano Black.
RANGE ROVER Vogue 4.4L V8 - 2002 - ex-2003 G4 Challenge Event Vehicle, Stage 3: Australia
FREELANDER 2 Td4 HSE "000" - Santorinin Black on Black
Gap Diagnostics' Classic and BT IID Tools!
Previous:
RANGE ROVER TDV8 x3
RANGE ROVER Td6 x1
RANGE ROVER Classic 3.5L V8 x1
DISCOVERY III x3
DISCOVERY II x3
DISCOVERY I x4
12th Mar 2012 6:26 pm
Wiggy Man
Member Since: 14 Nov 2010
Location: Hampshire
Posts: 158
I've just posted a WTD post so Fingers Crossed.......
By the way i should have Thanked You in my previous post, a great mod Cheers
.
12th Mar 2012 6:34 pm
Dave T
Member Since: 03 Jul 2009
Location: Glasgow
Posts: 6909
crossing works then! Joined the BMWX5 45e group
1994 Defender 90
2015 RRS Corris Grey/Black roof
2016 D4 Graphite Santorini Black
2012 D4 XS Orkney Grey
2005 D3 S Maya Gold
Convoy for Heroes 2011
12th Mar 2012 6:54 pm
henry-john
Member Since: 22 Feb 2011
Location: Belgium
Posts: 337
Dave T wrote:
I think that would be very good on Maya Gold, my only concern would be how long lasting the paint is (i'm assuming its out of a can). It can get very hot and humid in the lights.
after some time, the glue still on
Now waiting for an auction to end, to see if I can doe the mod on the rear lights as well
12th Mar 2012 7:03 pm
THFC
Member Since: 01 Sep 2010
Location: Biggin Hill
Posts: 743
I have a set if you want them Wiggy PRIDE OF NORTH LONDON
AUDERE-EST-FACERE
12th Mar 2012 7:11 pm
Dave T
Member Since: 03 Jul 2009
Location: Glasgow
Posts: 6909
henry-john wrote:
Now waiting for an auction to end, to see if I can doe the mod on the rear lights as well
What are you going to do at the rear?Joined the BMWX5 45e group
1994 Defender 90
2015 RRS Corris Grey/Black roof
2016 D4 Graphite Santorini Black
2012 D4 XS Orkney Grey
2005 D3 S Maya Gold
Convoy for Heroes 2011
12th Mar 2012 7:51 pm
henry-john
Member Since: 22 Feb 2011
Location: Belgium
Posts: 337
Dave T wrote:
What are you going to do at the rear?
Try to do the same as the front ones...
Open them, remove the red plastic, end paint black
12th Mar 2012 8:46 pm
henry-john
Member Since: 22 Feb 2011
Location: Belgium
Posts: 337
Won't be for this week, am looking for a cheap pair so it doesn't cost me a fortune if I screw up...
The ebay ones are going to be too pricey (at least to fail at first attempt)
13th Mar 2012 12:07 am
Wiggy Man
Member Since: 14 Nov 2010
Location: Hampshire
Posts: 158
Hi Guys
As you might have seen from my earlier post I did this headlight mod but managed to snap both of my orange bits as I wanted the thin amber reflector. Now thanks to Dave T I now have another set of orange reflector that need to be separated, I'm thinking of trying to dissolve or soften the glue somehow.
I've got a piece still attached on the old one that I can practice on, I've tried leaving in petrol to soak which did nothing, putting some evostik remover on but this attacked the plastic!
Looking for a miricle way to remove
Any ideas before I again?
17th Mar 2012 9:15 pm
crwoody
Member Since: 09 Mar 2009
Location: Littleborough
Posts: 2109
When I did mine, I left the amber strip attached to the bit where it attaches to the body of the lamp unit and cut off the part that goes over the indicator and around the sidelight, this made it easy to secure it properly and avoided any risk of damaging it.
Clive
17th Mar 2012 11:10 pm
Biffysun
Member Since: 09 Jul 2011
Location: Central
Posts: 1788
I managed to separate the orange reflector by using a combination of heat (hairdryer) plastic ruler as a wedge and a Stanley blade, go gently and it will come off in one piece That being said I tried several methods to attach it in the correct position and wasn't happy so put it all back and stayed standard! CrWoodys way is much better as you have a way of securing the reflector in the correct position without any other faffing around - good luck
17th Mar 2012 11:36 pm
Wiggy Man
Member Since: 14 Nov 2010
Location: Hampshire
Posts: 158
Thanks for the replies, i'll definitely use this method then Clive. Did you use a hacksaw?
18th Mar 2012 12:21 am
crwoody
Member Since: 09 Mar 2009
Location: Littleborough
Posts: 2109
Wiggy ; I used a fine tooth wood saw, I'm sure a decent sharp hacksaw would work as well but it's easier to cut a straight line with a wider bladed saw.
The only downside with doing it this way, (cutting the orange bit,) is that you can't put it back as it was if you eventually decide you don't like the new look, I'm very happy with mine though. 8)Clive
18th Mar 2012 10:46 am
Wiggy Man
Member Since: 14 Nov 2010
Location: Hampshire
Posts: 158
Thanks, yours looks good, i've been looking in your gallery. Mines silver too
18th Mar 2012 11:58 am
Dave T
Member Since: 03 Jul 2009
Location: Glasgow
Posts: 6909
Just be careful ........... Joined the BMWX5 45e group
1994 Defender 90
2015 RRS Corris Grey/Black roof
2016 D4 Graphite Santorini Black
2012 D4 XS Orkney Grey
2005 D3 S Maya Gold
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
That being said I tried several methods to attach it in the correct position and wasn't happy so put it all back and stayed standard! 
CrWoodys way is much better as you have a way of securing the reflector in the correct position without any other faffing around - good luck 
