Member Since: 17 May 2009
Location: Bury
Posts: 2089
Mantec sump guard
Can anyone advise on the above?
I'm about to purchase a new one of these as they are at a quite reasonable price at the mo but was thinking of having it in Ali to match the wheels or maybe powder coated to match my Java Black colour? Do they all come in the pre painted condition and if I put it on the D3 in this purchased condition will it just oxidise and look abit naff?
Any advise greatly appreciated.
Cheers CeekayD4 HSE Lux MY16 Club Waitomo
D3 HSE MY06 missing her still…
5th Dec 2012 10:11 am
devonchilliman
Member Since: 03 Nov 2008
Location: Devon
Posts: 5224
Ceekay I bought mine direct from Mantec and had it powder coated in Satin Black
Click image to enlarge
Click image to enlarge
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated Www.devonchilliman.co.uk
5th Dec 2012 10:27 am
Ceekay
Member Since: 17 May 2009
Location: Bury
Posts: 2089
Cheers DCM
I have seen yours actually before and that's prob why I'm in a dilemma
Wanted to purchase it and bolt straight on but if its going to oxidise fairly quickly then perhaps powder coat first? Is there a specific colour for your plate or do I just get them to match Java? Could also do with some idea of cost for the powder coat if poss. Still not sure if to get it to match the alloy wheels of black though?
D4 HSE Lux MY16 Club Waitomo
D3 HSE MY06 missing her still…
5th Dec 2012 1:09 pm
kp
Member Since: 27 May 2011
Location: Sticking the Ex back in the skanks bin
Posts: 2824
Thing is if you get it painted and actually USE it then it will look shabby after a while as the paint comes off...
Keeping it natural means when the scrapes happen its not as easy to see, especially at the front.
I have on on my FF and cost £100 all in and about 40-60mins to fit but is a great bit of kit that has saved the sump a few times...FFRR Owner, very nearly became a D3 owner
Test piloted a new D4 XS SDV6.. Gone and being forgotten i hope!!
D4 HSE 10MY
D4 XS 11MY
SSRR Destroyer *2
5th Dec 2012 1:38 pm
Ceekay
Member Since: 17 May 2009
Location: Bury
Posts: 2089
Cheers KP
Good Point, dont mind keeping it natural just don't want it to be scabby looking when it oxidises but suppose could always have it coated if it gets a bit ugly.
D4 HSE Lux MY16 Club Waitomo
D3 HSE MY06 missing her still…
5th Dec 2012 4:44 pm
J@mes
Member Since: 10 Nov 2008
Location: Bomber County
Posts: 4547
I paint mine with hammerite and a roller - that way when it suffers a scratch or scrape I can just roller it while it's still on the car and it looks *fine* again.
Not as good as a powdercoated one, but still better than a bare one IMO 2014 D4 XS
2005 D3 SE - Gone
5th Dec 2012 4:47 pm
Ceekay
Member Since: 17 May 2009
Location: Bury
Posts: 2089
Cheers James
Hamerite Smooth or Hamerite Hammered
Not a bad idea, dont do much real off roading but would hope to do in the future so perhaps a powder coat to start with and if it starts getting battered a roll over in situ with hammerite?
D4 HSE Lux MY16 Club Waitomo
D3 HSE MY06 missing her still…
5th Dec 2012 6:42 pm
kp
Member Since: 27 May 2011
Location: Sticking the Ex back in the skanks bin
Posts: 2824
I vote to leave it manly looking
Mine was used and has no oxidation on it FFRR Owner, very nearly became a D3 owner
Test piloted a new D4 XS SDV6.. Gone and being forgotten i hope!!
D4 HSE 10MY
D4 XS 11MY
SSRR Destroyer *2
5th Dec 2012 11:00 pm
toshers
Member Since: 22 Aug 2012
Location: Aberdeen
Posts: 49
Anyone got a pic of theirs fitted?
5th Dec 2012 11:20 pm
Ceekay
Member Since: 17 May 2009
Location: Bury
Posts: 2089
D4 HSE Lux MY16 Club Waitomo
D3 HSE MY06 missing her still…
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum