Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
  
|
Not so lucky maybe as I guess he hasn't had all teh software updates that make the car more reliable & a little increase in usable power (as I recall) Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
 15th Feb 2008 12:51 pm |
|
|
Gareth
Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26705
|
Yes, thats not so good Iain as it says your car has not had the 'Enhancement Program' which solved a whole host of other possible issues.
I used to have the ability to pre-time the FBH, but I don't miss it really. The car warms up quick anyway.
|
| 15th Feb 2008 1:09 pm |
|
|
evo8
Member Since: 29 Jan 2008
Location: Zalesie
Posts: 289
  
|
Local Webasto dealer is offering me a kit that will enable the interior heating:
kit (pipes, some cables) - cca EUR 300
remote control T91 - cca EUR 300 (i,ve seen cheaper on ebay)
mounting - cca EUR 100
All together - EUR 700 
It should work like this - after you press the remote control, it will start heating up the engine water first until it reaches 30 degC and then it starts also blowing warm air into cabin.
I've heard some rumours that on eralier model (2006) Webasto was not offering this kit as there were some communication issues - but these have been successfully solved and now it is not an issue and they are able to fit this even into older D3.
Has anyone seen/got this working on D3? Any practical experience to share? 2013 D4 TDV6 S; Baltic Blue; IID Tool BT
2007 D3 TDV6 SE, Auto; club Faultmate MSV2
|
| 19th Feb 2008 2:58 pm |
|
|
simonsi
Member Since: 14 Oct 2007
Location: Auckland
Posts: 1264
|
Do you have the Webasto part numbers for the kit and mounting? Cheers
Simon
|
| 19th Feb 2008 3:38 pm |
|
|
evo8
Member Since: 29 Jan 2008
Location: Zalesie
Posts: 289
|
simonsi wrote:Do you have the Webasto part numbers for the kit and mounting?
Unfortunatelly not. On their web they just have the part nr for Disco 2 kit (part nr 67090B) but not for Disco 3 - they just gave me the quotations over the phone.
The "mounting" means the mounting work  sorry for my english. 2013 D4 TDV6 S; Baltic Blue; IID Tool BT
2007 D3 TDV6 SE, Auto; club Faultmate MSV2
|
| 19th Feb 2008 3:47 pm |
|
|
BrumLee
Member Since: 07 Mar 2008
Location: West Midlands
Posts: 1360
|
Ian Thornhill wrote:My 2005 model still has the pre heat setting usable (you have to leave the radio on) and my interior gets toasty without setting the alarm off or flattening the battery.
How do you set this up or is a visit to the dealers?
|
| 16th Mar 2008 11:29 pm |
|
|
