Difference between revisions of "Hints & Tips"

From DISCO4.COM Knowledge Base
Jump to: navigation, search
m (Addition of key in ignition alarm)
Line 3: Line 3:
 
1. Switch on ignition
 
1. Switch on ignition
 
2. Insert and remove seat belt latch 9 times within one minute. It helps here to hold the release button down.
 
2. Insert and remove seat belt latch 9 times within one minute. It helps here to hold the release button down.
3. The D3 will bing to say its disabled.
+
3. The D3 will bing to say it's disabled.
  
 
Note that the red seat belt warning light will still appear on the dash.
 
Note that the red seat belt warning light will still appear on the dash.
Line 18: Line 18:
  
 
If you lean on the passenger seat while the engine is running the alarm will go off.
 
If you lean on the passenger seat while the engine is running the alarm will go off.
 +
 +
To disable the audible key in ignition alarm:
 +
 +
Sorry! There is currently no easy way to do this. Either advance the key one position in the ignition or remove it.

Revision as of 22:25, 6 March 2008

To disable the audible seat belt alarm :

1. Switch on ignition 2. Insert and remove seat belt latch 9 times within one minute. It helps here to hold the release button down. 3. The D3 will bing to say it's disabled.

Note that the red seat belt warning light will still appear on the dash.

ONLY do this if you really can remember to use your seat belt. Safety 1st !

Repeat to turn back on the audible alarm.

USES:

If you are constantly in and out of the D3 for any reason and do not wear your belt, the alarm can get annoying.

If you place items on the empty passenger seat the alarm will go off over bumpy ground.

If you lean on the passenger seat while the engine is running the alarm will go off.

To disable the audible key in ignition alarm:

Sorry! There is currently no easy way to do this. Either advance the key one position in the ignition or remove it.