Hints & Tips

From DISCO4.COM Knowledge Base
Revision as of 19:14, 18 January 2009 by DiscoStu (talk | contribs) (Disable/enable the automatic interior lights)
Jump to: navigation, search

Disable the audible seat belt alarm

  1. Switch on ignition
  2. Insert & remove seat belt latch 9 times within one minute. It helps to hold the release button down.
  3. The D3 will bing to say it's disabled.

Note that the red seat belt warning light will still appear on the dash.

ONLY do this if you really can remember to use your seat belt. Safety first!

Repeat the above procedure to enable the audible alarm.

Uses

  • If you are constantly in and out of the D3 for any reason and do not wear your belt, the alarm can get annoying.
  • If you place items on the empty passenger seat the alarm will go off over bumpy ground.
  • If you lean on the passenger seat while the engine is running the alarm will go off.

Disable/enable the automatic interior lights

  1. Press and hold the middle button in the overhead console for about 5 seconds
  2. The interior lights will flash
  3. The message centre will display "INTERIOR LIGHTS OFF"
  4. The interior lights will now stay off when a door is opened

Repeat the above procedure to enable the automatic interior lights

The message centre will display "INTERIOR LIGHTS AUTOMATIC"

More Tips

See the Tips & Tricks area on the forum for more tips.