Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26779
Added to Wiki also. Let us know if you are successful in fixing this
29th Apr 2014 6:53 am
TDi.Si
Member Since: 09 May 2013
Location: Stroud, Glos
Posts: 101
So started the connector bypassing. Did the white connector first:
Click image to enlarge
Then started on the black connector, but found someone has already been there! One pair of twisted wires has been cut and joined and a red wire cut and joined, all 3 into plain black cables, so I followed them along the loom, they join back into the original colours just before the EPB connector. Then it started raining!
Click image to enlarge
I'll check the continuity along them before I join them and hope it's a good job, I'm 99% sure I know where this was done (yes it was a main dealer) as I bought the car from friends. Then I just need to put the whole car back together and hope it works, don't like it looking like this!
Click image to enlarge
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated
29th Apr 2014 7:21 pm
TDi.Si
Member Since: 09 May 2013
Location: Stroud, Glos
Posts: 101
This seams to be fixed now! Touch wood!
The red wire which is joined in the photo was broken at the plug where someone had split the insulation, all soldered up & heatshrunk now. I filled the back of the EPB connector with silicone grease before re assembling it. Also my hand brake fault has gone again, must be the red wire causing that.
Whilst it was apart I changed the washer bottle as it had split along the seam, seamed a good time to do it! Hopefully that's all it'll need for the MOT which is looming!
Thanks again to everyone for all your help! Would still be in bits if it wasn't for you!
4th May 2014 10:04 pm
Kingmav66
Member Since: 20 Jul 2010
Location: Gloucestershire
Posts: 1349
Well done
If I have a wiring fault, I know who to call.... We're in GL2
4th May 2014 10:59 pm
MXB
Member Since: 27 Jan 2015
Location: Staffordshire
Posts: 13
Makes you wonder that in another 10-15 years time when most of these electrical connectors have broken down, how many Disco 3'S will be broken/scrapped because they cannot trace the faults? No good sending it to the stealers as 1) they probably won't find it and 2) It will cost £1,000 to not find the fault
13th Apr 2015 5:51 pm
newtoD4
Member Since: 25 Aug 2015
Location: Accra, Ghana
Posts: 7
Driving a D4 now, and the more I read stories like this one, the more I worry about long term ownership of the car. Why make a car so freaking complex?.... you're effectively driving around in a laptop computer with these vehicles.
29th Aug 2015 10:05 am
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50979
D4 is much more stale ...don't read D3 threads 21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
"stale" Am I Gammon or Woke ? - I neither know nor care.
2016 Discovery 4 Landmark
2011 Mercedes Benz SL350 (R230)
1973 MG B GT V8 - 3.9L John Eales engine, 5 speed R380 gearbox, since 1975.
1959 MGA roadster - 1.9L Peter Burgess Engine - 5 speed gearbox
Past LRs - Multiple FFRs, Discos & a Series I - some petrol, some diesel,
none Electric or H2 fuel cell - yet.
There are 10 types of people in this world: Those who understand binary, and those who don’t.
29th Aug 2015 12:34 pm
newtoD4
Member Since: 25 Aug 2015
Location: Accra, Ghana
Posts: 7
Stale?? Meaning in this context being??
I assumed the D4 is basically a D3 with some cosmetic changes.
Were all the issues of the D3 ironed out with the D4, making it a more reliable vehicle?
Just asking here. Thanks.
29th Aug 2015 2:49 pm
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50979
Member Since: 01 Jan 2016
Location: Skopje
Posts: 2
Engine failure
Discovery 3, 2.7TD engine. Just suffered sudden engine failure without previous announcement(no signs that this can happen) with 175.000 km on the clock. No warning lights before the failure. Vehicle was regularly maintained, oil and filters changed on time. Belt set changed on 160.000km.
Can not say if extended oil warning light for 2-3 seconds when first morning engine starting ever since I drive this vehicle (from 120.000km) has something incommon with the failure.
Is there any goodwill offer for new engine by Land rover?
3rd Jan 2016 4:27 pm
gidiLR3
Member Since: 19 Jan 2017
Location: London
Posts: 2
Here is my very first experience with a Discovery 3 after wanting one for so long
Note I say "a Discovery 3" and not my Discovery 3
driving happily along the German Autobahn A3 had just filled up the tank with diesel when all of a sudden it cut out and lowered, hazards started flashing, interior lights came on, doors unlocked, lots of lights on the dash, E in gear display. Suspension lowered, hdc fault, engine system fault, system fault special programs not available, when I managed to get on to the Hard shoulder the handbrake came up.
this is where I spent the next 5 hours in -3degree centigrades freezing my off
waiting for the ADAC ..... europes version of the AA or RAC
4hours in to my wait the Polizie turned up ..... I have never been so happy to see the police they stayed with me until I was recovered to the ADAC garage, and then dropped me off at a Hotel for the rest of the night
Next morning I had to be recovered again to the main LR dealer in Essen where I left the car as they could not take a look at it because there were so many LRs that had broken down.... 4more LR turned up on the back of ADAC lorries whilst i was there
19th Jan 2017 1:26 pm
Sloss
Member Since: 18 Aug 2013
Location: Aberdeenish
Posts: 1691
Mods: This might need its own thread?Stew,
2010 D4 gone but I really loved it
Went back to Merc - C350 AMG
Dont know why I didnt find this thread earlier, but theres some similarities to an issue Im currently having. When mine faults it dosent cut the engine if its running, but the hazards come on and I hear the doors unlocking. If the cars off and this fault is active then the hazards still come on and the engine wont start.
One thing I failed to mention earlier as I didnt think it was related but after reading this thread it may be is I was seeing park brake faults flashing up on the dash every now and again so I guess the logical thing would be to add that to the list of areas to check out. Might be difficult as I have a long range tank installed which may need to be removed to access
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
off
