Member Since: 04 Feb 2020
Location: Landscove
Posts: 10
Discovery 4 2015 8 speed rotary gear selector
Hi, had an ongoing issue with the rotary gear selector, sticking in park and drive several times over the last few months. Now stuck in drive so cannot start car.
Have removed centre console, selector is part number EH22-7E453-AB. Is this simply a plug & play item if I replace with same model or does it require some form of programming?
Have searched the forum extensively, but cannot find a definitive answer. Car is in remote location to cannot get to a local garage (RAC tried & failed).
I use the GAP iid tool so can clear any error codes if that’s the programming issue?
Any advice gratefully appreciated.
Thanks
27th Nov 2022 5:59 pm
ronp
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15263
Member Since: 04 Feb 2020
Location: Landscove
Posts: 10
Thanks ronp. Had a read through that one, can’t seem to find the programming or not answer.
27th Nov 2022 7:08 pm
RATA1
Member Since: 27 Feb 2020
Location: Somerset
Posts: 353
I replaced mine because the green light was inop. Straight swap with a later one, no programming needed.In today's world, if you contribute something, you don't contribute enough. If you contribute nothing, you receive everything.
2014 Discovery XXV
1961 Series 2
27th Nov 2022 7:56 pm
fat bloke
Member Since: 07 Aug 2006
Location: OXFORD
Posts: 1257
Mine did same stuck in gear or park ? Module replaced part of faulty batch of cars with vins nmb 2014/15 models I think.
27th Nov 2022 8:00 pm
Landscove
Member Since: 04 Feb 2020
Location: Landscove
Posts: 10
Thanks, stuck in drive, cannot start. I'm of the impression they are not coded to a particular vehicle, so should be plug & go. Have found a few spare ones online, so trying to make sure if I fit a replacement it should work without any additional programming....
27th Nov 2022 8:20 pm
jimbo55
Member Since: 10 May 2022
Location: England
Posts: 38
Is swapped out as a whole unit, they should be VIN coded to your car when installed (hence needing programming) but I think they do work without.
If you don’t mind having the silver topped one from an XXV limited edition, they are significantly cheaper than the black topped selectors. Black topped ones were on back order with no estimated date when I changed mine a month or so ago
28th Nov 2022 10:03 am
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8226
I fitted one off another car without any problems, just plug in. I have repaired the old one for emergency use, the only downside is it is possible to rotate it without stopping, you are welcome to it if it will get you out of trouble. It can when others can't,
It will when others won't,
It goes where others don't.
28th Nov 2022 10:11 am
Oswiperus D3 Decade
Member Since: 02 Apr 2010
Location: Chelmsford, Essex
Posts: 1599
I Stumbled across on super cheap one on ebay back in 2019 after the LED ring stopped working. Popped it in and worked perfectly.Stu
2016 D4 Landmark current
2022 Defender D300 SE Gone
D4 2014 XS Commercial - Gone
D4 2016 hse lux montalcino red - Gone
D3 2005 se java black - current
D3 2005 base manual - gone
D2 1999 TD5 E white - current
28th Nov 2022 1:35 pm
Landscove
Member Since: 04 Feb 2020
Location: Landscove
Posts: 10
Thanks for all the replies. All sorted EH22-7E453-AB is part number LR090489, all installed no requirement for programming. Thanks to inde Land Rover dealer Frank Wills in Ashburton for selling me his only remaining stock!
28th Nov 2022 5:03 pm
nigethecat
Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4244
This seems to be a common issue as I had this happen on my 2015 D4, just the once but enough to be concerned as I was a long way from home. Restarted mine by turning everything off and on again but I feel this should be a TSB if it's a faulty batch...I want to see the sweets before I get into your windowless van... I'm not stupid!
Corris Grey D4 Commercial SE 2016
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
28th Nov 2022 5:12 pm
NC500
Member Since: 18 Sep 2017
Location: On the NC500
Posts: 541
Get it repaired or do as I did and get it modified before it fails
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
