Member Since: 08 Nov 2005
Location: Oldbury, WM
ATC log reader
Is there an easy way to read the fault log that the ATC unit keeps? Just got back from France and have had the situation where I plug in the 13pin socket to to car, ATC LED goes green - so all OK. Get to where we are going, or a stop for a drink/etc, and LED is red. Unplug and replug in, LED goes green.
The user manual says this is due to the fault log being full, but I cant say I've felt the ATC kicking in at all, and I'm sure the small amount of sideways push & pull I feel when being overtaken by something like a large motorhame or luton type van wouldnt have been enough to trigger the ATC.
Before we got off the ferry, I disconnected the plug and reconnected, then ran all the way home (M27,A34,M40) driving exactly like I had in France (but obvioulsy on the left hand side of the road before some wag jumps in there ) and on reaching home ATC LED was still green.
I know about the 12v connected for 12hrs thing to clear the memory, just need to work out how to do that, from a practical perspective, but keen to know why the memory is full, if thats what it is.
AlMY18 D5 HSE - Corris on 22's with Black Pack
Now gone - MY16 D4 SE Tech, Loire Blue, Almond Leather, Privacy, plus some other goodies.
Old - MY12 D4 SDV6 XS Auto - Ipanema Sand with Almond Leather - Plus other niceties, and D4.com sticker
Older - D3 TDV6 XS Auto - Lugano Teal with Almond Leather, 20" Stormers, Shiny Tailpipes, DVD/TV - and obligatory D3 sticker
Ancient - D3 TDV6 S - Tonga with Ebony, 20" Stormers, satnav & DVD
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum