Member Since: 10 Aug 2015
Location: sydney
Posts: 3
GVIF Install Settings
Hi all,
This is my first post on the UK site so thanks for any help in advance
I have a GVIF model QVI-GF08-V8.0 U
Having spent some time trying to get the DIP switch settings to work
It is time to ask for help
I have the installation instructions from Disco3UK Resource V1.2
These settings are based on Model 6.2
So the question is has anybody installed the V8.0 or similar and would be able to tell me the Dip switch settings used
My model is the HSE with DVD nav installed
4th Jan 2018 12:39 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10684
If instructions did not come with it try google the number on the box
Why do you think the settings need to be changed anyway?
Is something not working.
Usually you have to power it down for changes to take effect.
4th Jan 2018 4:06 am
gandalf
Member Since: 10 Aug 2015
Location: sydney
Posts: 3
Thanks for the prompt reply Pete K
No instructions with the unit, it was set with only the switch 7 down ( on ), and no nav available
After trying many variations of settings, with car going to sleep, turned out it was one of the gvif
plugs the wrong way around, problem solved.
But the remote is not working ( cordless) so I can’t adjust any settings, one of which is the camera is showing a reverse image to normal ( image flipped left to right ).
Any suggestions
Les
4th Jan 2018 5:57 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10684
I was going to say that Put some paint marks on connectors to show correct orientation
Image flip will need sorting at the camera. (once you are sure its wrong! - Have you got it fitted at the rear ? )
Usually there Is a tiny wire loop coming out, and you cut this to flip it.
Some have a wire to cut to remove reversing lines.
On My eye ball one, I also had to rotate 180° if fitted pointing down.
I had issues with my remote not working. TUrned out I need to connect the CAN wires to the rear of the nav unit.
The Nav hard button should also cycle thru Av1 Av2 NAV etc when can connected
4th Jan 2018 12:15 pm
gandalf
Member Since: 10 Aug 2015
Location: sydney
Posts: 3
Thanks to your help all is sorted
The camera i rotated 180 and it flipped the image left to right (who would have thought )
The Remote i now won't need, and i can live without bendy lines
Tidied up the wiring this morning before it got too hot ( 41 and 44 for the weekend )
Thanks again, and i hope i can help somebody 1 day.
5th Jan 2018 1:56 am
BrianX
Member Since: 11 Dec 2005
Location: Bolton UK - it may be 'grim up north' but at least you get gravy on yer' chips.
Posts: 217
@ Gandalf
Hi, I'll be doing the same in a few days with the same version.
Can you give a bit more info on the 'connect CAN wires to the rear of the nav unit' please?
Cheers'
'
'05 Disco3 TDV6 - gone
'06 Disco3 TDV6 - gone
'08 Freelander 2 - gone
'98 P38 V8/LPG - gone
'02 L322 V8 - gone
'02 Freelander 1 - gone
'05 Disco 3 TDV6 - SWMBO
'06 L322 V8 - current
I am looking at potentially getting a QVI-GF08 and I was just wondering if there was any existing wiring for a rear camera or whether it needed to be installed from scratch?
Thanks
Andy2005 Discovery 3 HSE TDV6 diesel
2007 Mercedes E280 v6 diesel
Can you sense a theme here?
Mind you the 2.25 Petrol Series II with Series III wings for quad headlights, high power alternator conversion and a few other bits and bobs does rather break the theme
30th Dec 2019 1:01 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10684
Needs install from scratch
30th Dec 2019 1:35 pm
kajtzu
Member Since: 10 Aug 2017
Location: Helsinki
Posts: 6754
Add a rear ladder while you’re at it, won’t have to do the job twice especially if the bolts are
Aye, especially if I put a roof rack on 2005 Discovery 3 HSE TDV6 diesel
2007 Mercedes E280 v6 diesel
Can you sense a theme here?
Mind you the 2.25 Petrol Series II with Series III wings for quad headlights, high power alternator conversion and a few other bits and bobs does rather break the theme
30th Dec 2019 2:54 pm
V8man
Member Since: 01 Jan 2021
Location: Dunno i was just following the satnav😳
Posts: 288
Brian x
I dont think you need to connect the can wires ive got version 7 and not connected them, everything works fine .
Av1, 2 and 3 plus reverse cam.
Maybe a more of an expert could confirm.1996 Defender -died (now in landrover heaven😇)chassis to ashes , rust to dust !
2004 Defender td5 gone
2012 Evoque gone
2007 D3 V8 HSE
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Put some paint marks on connectors to show correct orientation
