Member Since: 01 Apr 2013
Location: Bavaria
Posts: 83
I have just added some pictures taken while mounting my Tripple R-750 Elite 2 Lazer lamps earlier this year on my MY14 using a kit supplied by OEM Plus (https://oem-plus-webshop.de/) from Germany:
The kit includes mounting brackets, an electronic relay, switch, cable loom, etc.
It does require tapping into the main beam signal and provides full control of ther spot lamps:
- Lamps enabled together with full beam
- Lamps switched independantly
- Lamps off
Hope this helps you finding a solution for your set-up.
Greetings,
OlafDisco4 V6 SC HSE (MY2014)
Last edited by Avalon on 28th Nov 2018 8:09 pm. Edited 1 time in total
28th Nov 2018 7:13 pm
RBB
Member Since: 19 Nov 2018
Location: Fife
Posts: 167
May thanks Olaf.....Lamps arrive tomorrow, pick the D4 up on Saturday....I foresee some dark nights locked in the garage
Cheers
28th Nov 2018 7:48 pm
TwoSheds
Member Since: 11 Sep 2018
Location: Royal Deeside, in a cottage on a hill
Posts: 25
Basically you bring 'always on' power into one side, a feed from the full beam on the other, and take power to the relay from the middle.
With the switch up the extra lights are on independently of the headlights (and the red warning light is on)
With the switch centred, the extra lights are off
with the switch down, the extra lights come (and go off) on with high beam
I am thinking of doing the same with my D4 before next winter (I do a lot of full beam driving in the winter)
RogerDisco4, Disco2, R1200R, CBX600FX, multiple Ham radios, and several bicycles...
All that lot and a tool fetish means that I seldom have more than two brass farthings to rub together.
11th Feb 2019 2:45 pm
Avalon
Member Since: 01 Apr 2013
Location: Bavaria
Posts: 83
Hi Roger,
the two switches control different lamp circuits. One is for the front spot lights and the other for aux-lighting on the roof-rack, when it is mounted.
Regards,
OlafDisco4 V6 SC HSE (MY2014)
11th Feb 2019 4:06 pm
TwoSheds
Member Since: 11 Sep 2018
Location: Royal Deeside, in a cottage on a hill
Posts: 25
ah -ok, thanksDisco4, Disco2, R1200R, CBX600FX, multiple Ham radios, and several bicycles...
All that lot and a tool fetish means that I seldom have more than two brass farthings to rub together.
13th Feb 2019 12:51 pm
Inigo
Member Since: 28 Feb 2012
Location: Kent
Posts: 300
I've just bought the OEM-plus kit and wanted to add a second switch similar to Avalon. I can't seem to find a source of these switches. Can anyone point me in the right direction?
Part number on the side 05313503 seems to suggest an alrm switch for a VW passat.
6th Dec 2019 7:07 pm
Avalon
Member Since: 01 Apr 2013
Location: Bavaria
Posts: 83
Hi,
yes, those are VW switches with a newly engraved symbol. If you contact them I think they will be able to get you a switch and the connector as well.
Regards,
OlafDisco4 V6 SC HSE (MY2014)
9th Dec 2019 2:35 pm
Inigo
Member Since: 28 Feb 2012
Location: Kent
Posts: 300
Great, thank you, I will ask.
9th Dec 2019 7:35 pm
Inigo
Member Since: 28 Feb 2012
Location: Kent
Posts: 300
Halfway through fitting this kit and I'm unsure which connectors the extra pins go to. Avalon mentioned connector C2443, but I can't seem to track down the list of connectors for the MY2016 Discovery. How do I know which one this is?
20th Dec 2019 4:09 pm
Avalon
Member Since: 01 Apr 2013
Location: Bavaria
Posts: 83
Hi Ingio,
if you download the schematics and connector data from the ondrive share provided by the user DGARDEL here on the forum you will find a layout document for the main connectors - "JLR 15 00 21_1E - DISCOVERY 4 - MY2014 - Connector Quick Reference Guide"
The connector is located in the footwell just above the footrest on the drivers side. If you look into my galery you will find a picture showing the connector - https://www.disco3.co.uk/gallery/displayim...mp;pos=11. As my car is a LHD you must mirror that over to your RHD.
Regards,
OlafDisco4 V6 SC HSE (MY2014)
20th Dec 2019 4:27 pm
Inigo
Member Since: 28 Feb 2012
Location: Kent
Posts: 300
20th Dec 2019 5:52 pm
Bertie15
Member Since: 22 Dec 2017
Location: Perthshire
Posts: 30
I am in the process of installing the Lazer Lamps Triple R 750 Disco 4 integration kit right now.
Would anyone be interested in me taking a few notes and photos as I go to serve as a reference to others?
The mounting of them is very straightforward and well explained in the documentation provided, but I suspect the wiring is where most people come unstuck...
29th Jan 2020 9:25 pm
Ceekay
Member Since: 17 May 2009
Location: Bury
Posts: 2089
I would for one especially with not being able to just connect to the existing lighting feeds and having to tap onto the canbus etc etc. D4 HSE Lux MY16 Club Waitomo
D3 HSE MY06 missing her still…
30th Jan 2020 11:09 am
Inigo
Member Since: 28 Feb 2012
Location: Kent
Posts: 300
I've done mine, but didn't take very good pictures and was slightly flummoxed by the wiring, so think your write up would be useful.
30th Jan 2020 11:40 am
Avalon
Member Since: 01 Apr 2013
Location: Bavaria
Posts: 83
Ceekay wrote:
I would for one especially with not being able to just connect to the existing lighting feeds and having to tap onto the canbus etc etc.
If you have the right kitt, there is no need to tap into the can bus. The kit from OEM Plus taps into the high beam feed only - even for MY 14 to 16. Disco4 V6 SC HSE (MY2014)
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
