Slasher899
Member Since: 06 Jul 2024
Location: Bath
Posts: 3
|
| Loss of high speed can bus communication on all modules |
|
Recently replaced parking brake module when I went to program new module as soon as I turn the key cluster lit up like a Christmas tree hazards flashing run diagnostics using SDD could not communicate with any modules on the high side of can bus network Can see any obvious signs of damage cables don’t know where to go from here looking for advice and help
|
 6th Jul 2024 6:31 pm |
|
|
Martin
Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18561
 
|
New or used EPB module?
Sounds like you’ve “broken” the HS CAN bus somehow. 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
|
| 6th Jul 2024 9:20 pm |
|
|
1784
Member Since: 04 Sep 2009
Location: Almunge
Posts: 170
 
|
Try connecting up your old EPB module again, no need to mount it, just put in the connector and see if the issue goes away. Defender 110 SE 2021, Tasman Blue
Discovery 1 V8 ES 1997, Epsom green
Discovery 3 V8 HSE 2006, Bonatti Grey
Range Rover V8 1983, Sierra Silver
|
| 6th Jul 2024 11:33 pm |
|
|
Slasher899
Member Since: 06 Jul 2024
Location: Bath
Posts: 3
|
Issue started as soon as new one was plugged in
|
| 6th Jul 2024 11:36 pm |
|
|
Slasher899
Member Since: 06 Jul 2024
Location: Bath
Posts: 3
|
It was new unit
|
| 6th Jul 2024 11:37 pm |
|
|
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1818
 
|
There is a picture of the Canbus in my gallery with pin and plug connections. Seems gallery not working.
|
| 24th Jul 2024 9:57 am |
|
|
