haveyoubooked
Member Since: 03 Aug 2020
Location: Ardgay
Posts: 25
|
| Multipin type, manufacturer and retailer? For all loom plugs |
|
Hi all,
Long time since I posted, its been behaving very well!
Recently had recurring (3rd time) problems with front air suspension loom.
Mines a 2004, so the plugs where body loom joins chassis suspension loom is behind the n/s/f wheel arch liner.
Basically its put an orange or red light on for suspension and every time its a different bit of the front loom (connects 2x front level sensors and front valve block) thats got a break in a cable. Cue stripping back flexi conduit cover, locating wire, soldering in a new length and heat shrinking (with glue lined shrink) the repair.
Roll forward another year and repeat on a different wire.
Anyway, i've got it up on the ramp at the moment with all liners and trims off to do a handbrake module and general rustproofing session and thought, i'll replace the front loom whilst in there.
Looked on Landrover Classic parts and looms are available post 2006 for £113, but those looms are the ones that have the plugs in engine bay.
So looking to make my own. Can use the original plug housings, but need new pins and seals. Anyone know the spec/where to get them from? Have plenty of coloured cables in all the old lucas colours and various gauges in stock from making looms for some of my older LR and british classics, so its only the pins and seals thats stopping me making a loom. Discovery 3 TDV6 SE Manual 2004
Discovery 3 TDV6 Manual 2005
Saab 9-5 Aero Hot Manual Estate 2006
Alfa Romeo 156 2.4 SW 2003
Classic Mini 1152cc "special" 1979
Series IIa 109TC 2.6l 6 cyl 1971
|
 8th Mar 2024 6:01 pm |
|
|
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1818
  
|
Contact a member on here called Martin.
|
| 14th Mar 2024 9:47 am |
|
|
