Member Since: 02 Jan 2024
Location: ts27 4rr
Posts: 1
Propshaft
esterday at 17:47Add bookmark#1
HI all just had MOT done all good apart from advisor Propshaft bearing has slight play ( RUBBER DETERIORATED) called in the local 4x4 garage and they recommend that it would pay just to change the whole shaft any advice and thoughts
I would not have known there was any issue as there is no noise etc
Repair or replacement of the UJ joint generally is not recommended. The usual recommendation is to replace the shaft with an original part. I believe GKN were the original manufacturer, but a search on here should confirm.
Regards,
Steve
22nd May 2024 8:28 am
Gary_P
Member Since: 03 May 2016
Location: Kent
Posts: 1597
Most replace the whole rear propshaft. Although there’s also some that repair small splits with a sealant.
Here’s a topic with a poll on people’s approach. Plenty of other info on here regarding this subject. Search ‘propshaft’.
Mine wasn’t split badly at all but had mine replaced at around 30,000 miles which isn’t unusual as you will see. I got no vibration or issues whatsoever ever. GKN is the favoured make.
Member Since: 06 Mar 2017
Location: Lost
Posts: 4939
The centre bearing can be replaced and although a bit fiddly it is not difficult if you are reasonably competent and have the tools.
If you have to pay someone to do it then a complete shaft replacement is the way to go. yµ (idµ - eAµ) ψ=mψ
22nd May 2024 2:24 pm
ronp
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15258
If you replace it, GKN is the way to go. ...... always on the road less travelled 🚧
22nd May 2024 2:46 pm
CDS Site Sponsor
Member Since: 12 Oct 2009
Location: All over the UK!
Posts: 3331
New rear prop shaft required, only fit GKN unless you like to do jobs twice
Discovery 3/4 & RRS keys cut and programmed at your home or work
Apple CarPlay/ Android Auto retro fit - see it here
BAS Remaps/ EGR Blanking
Software updates/ enabling
Mobile Servicing & Repairs
22nd May 2024 7:31 pm
highlands
Member Since: 11 Jan 2010
Location: NW Highlands
Posts: 5098
If it's only moderately split and not making any vibration/noise, why not just Sikaflex it for £10?
Call yourself Land Rover owners! Black 05 TDV6 HSE Auto
Grey 05 TDV6 HSE Auto (Gone)
54 TDV6 SE Man (killed by me )
Very strange.
I've gone through a number of MOT's with a known knackered centre bearing. Tester is happy.
No clues in cabin and I will get around to it one day honest.
27th May 2024 8:10 pm
CDS Site Sponsor
Member Since: 12 Oct 2009
Location: All over the UK!
Posts: 3331
Just proves how subjective MOT tests are
Discovery 3/4 & RRS keys cut and programmed at your home or work
Apple CarPlay/ Android Auto retro fit - see it here
BAS Remaps/ EGR Blanking
Software updates/ enabling
Mobile Servicing & Repairs
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum