Arthur27
Member Since: 17 Apr 2020
Location: Alcester
Posts: 10
|
Hi, I've only had my Discovery 3 for a few weeks 2008 HSE tdv6, i was investigating if it had a TV module or the wiring for one behind the offside rear panel, came across these 2 modules
Photo 1 and 2 land rover xra500031 is to the left of photo 3 i disconnected the wiring and cleaned the terminals and reconnected, But now the radio switches on but no sound and the screen only displays the Landrover logo
After further investigation
I've bypassed the Bluetooth (first module the black one) still nothing this did have a red light fibre optic signal going to it, then reconnected it, bypassed the second module ( silver one) nothing this had no red light signal going to it, it only had a red light signal when the Bluetooth module was bypassed
Any help appreciated
David
|
 1st Oct 2020 5:19 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10361
  
|
well it sounds a bit odd that the BT model didn't have a red light coming out of it.
See if these modules have power going to them.
or the optics have been damaged I guess.
Use a torch on one end of optics to confirm any suspect ones are ok. (i.e those that don't give out a red light)
|
| 1st Oct 2020 6:18 pm |
|
|
Stedaw
Member Since: 06 Aug 2019
Location: Uk
Posts: 17
 
|
Hi did you solve the radio sound problem as I have the same issue ?
|
| 4th Oct 2020 4:28 pm |
|
|
Arthur27
Member Since: 17 Apr 2020
Location: Alcester
Posts: 10
|
Yes fixed it turned out to be a 5amp fuse had blown on the fuse board in the passenger footwell, its number 52 Telephone, must have earthed the live wire when disconnecting the modules, didn't think it was a fuse as the day before i had the fuse board CJB out to replace the sunroof drain pipe and checked all the fuses with a circuit tester while on the work bench
|
| 6th Oct 2020 9:43 pm |
|
|
