Member Since: 11 Jun 2014
Location: Peterborough
Posts: 163
Sat Nav ETA
All of a sudden my sat nav wont show an ETA but everything else is fine with the sat nav.
Any ideas anyone?
8th Feb 2019 8:52 pm
Kilovolt
Member Since: 29 Jun 2015
Location: South Derbyshire
Posts: 1063
About to break down "Track day running - Don't put your foot back on the accelerator until your absolutely sure you don't have to take it off again"
Current Ride: D4 XS Commercial Baltic Blue SDV6 fully loaded with heated everything
Track Days: BMW E36 M3 Evolution MY 1996 (3.2 Litre 377 BHP sat in 1,250 Kgs of car, with a pro safety cage and some serious braking power)
9th Feb 2019 8:22 am
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
I would try resetting it first.
Remove and the refit the DVD from the unit under the passenger seat, failing that power it down
Member Since: 11 Jun 2014
Location: Peterborough
Posts: 163
Tried all the suggestions and still the same. Its no big deal but is useful
10th Feb 2019 8:27 am
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26774
What is showing in the place where the eta would be displayed?
Suck eggs question, but you have put a route in haven’t you?
10th Feb 2019 8:32 am
autobiorob
Member Since: 11 Jun 2014
Location: Peterborough
Posts: 163
Cannot think of how many times I have used it before so yes i have put a route in but the question has to be asked.
It literally just shows --:--
10th Feb 2019 8:38 am
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
Do you have a Sat Nav manual?
If so have a look at page 24
Route Guidance Screen types
It may be the case you have inadvertently switched off that function
here's a flavour
(any chance you could stick a photo up of your screen?)
10th Feb 2019 8:44 am
autobiorob
Member Since: 11 Jun 2014
Location: Peterborough
Posts: 163
This only shows different screen set ups, not the info on it.
Swmbo says we are going shopping today (great!) so will take photo then
Cheers
10th Feb 2019 8:50 am
autobiorob
Member Since: 11 Jun 2014
Location: Peterborough
Posts: 163
10th Feb 2019 2:05 pm
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
Just been out and had a play with mine and managed to recreate your 'fault'
Menu
Nav Set Up
User Settings
Then press the arrow down on the bottom left
Arrival time - should be set to on (mine was) I toggles this to off and got the same --/-- display as you
Hopefully yours is the same
10th Feb 2019 2:28 pm
autobiorob
Member Since: 11 Jun 2014
Location: Peterborough
Posts: 163
afraid not as tried that already
10th Feb 2019 6:19 pm
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
Ah well that wxplains it then
Its broken
10th Feb 2019 6:24 pm
Bungle
Member Since: 07 Apr 2015
Location: Wanborough
Posts: 256
Long shot, but it could be the same problem as when you get the dashes on the binnacle instead of the time, if the satnav doesn't know the current time it can't give you an ETA. Fix for this is to disconnect the battery, leave it for 30 secs or so, touch the negative and positive leads together (note the LEADS not the terminals on the battery) to make sure all the various capacitors are discharged, then reconnect it all.
11th Feb 2019 8:01 am
autobiorob
Member Since: 11 Jun 2014
Location: Peterborough
Posts: 163
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
