ty-george
Member Since: 08 Jan 2018
Location: Derbyshire
Posts: 82
  
|
So today my Iid tool arrived and having played with every function i could find the only bit im stuggling is to get the CCFs to change. When the tool reads the CCFs it has saved the changes from the last attempt but nothing is changing. Timed climate seems the easiest one to discuss? Or do i need additional hardware? 2015 SE Tech Good bye untrusted p38
Hello 15my Disco 4
Not forgotten you disco2!
|
 6th Jul 2018 9:24 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6308
  
|
If you have done it right you need to let the car go to sleep after the changes to get them to show.
Flack 
|
| 6th Jul 2018 9:45 pm |
|
|
ty-george
Member Since: 08 Jan 2018
Location: Derbyshire
Posts: 82
|
When you say go to sleep, how long would that be? Good bye untrusted p38
Hello 15my Disco 4
Not forgotten you disco2!
|
| 6th Jul 2018 9:53 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6308
|
Till the dash and sat nav screen go off.Just lock the car and leave it for 10 mins.
Flack
|
| 6th Jul 2018 10:39 pm |
|
|
ty-george
Member Since: 08 Jan 2018
Location: Derbyshire
Posts: 82
|
Oh, seems it didn't work. Its sat a few times long enough for this to happen!  Good bye untrusted p38
Hello 15my Disco 4
Not forgotten you disco2!
|
| 6th Jul 2018 10:55 pm |
|
|
Brooksie69
Member Since: 09 Jun 2014
Location: Wigan
Posts: 176
|
If your car has a ghost immobilizer fitted you need to put it in service mode to be able to change any ccf or do any updates.
The ghost has an obd protection on it. ...........One life live it..........
|
| 6th Jul 2018 11:01 pm |
|
|
ty-george
Member Since: 08 Jan 2018
Location: Derbyshire
Posts: 82
|
Oooh ok, do you happen to know where i might find that? Sounds like it might be the source of my troubles! Good bye untrusted p38
Hello 15my Disco 4
Not forgotten you disco2!
|
| 7th Jul 2018 8:45 am |
|
|
Brooksie69
Member Since: 09 Jun 2014
Location: Wigan
Posts: 176
|
Do you need to put a code in the car before starting? 4 to 10 buttons pressed before starting the car. If this is the case you have a ghost fitted. ...........One life live it..........
|
| 7th Jul 2018 8:51 am |
|
|
ty-george
Member Since: 08 Jan 2018
Location: Derbyshire
Posts: 82
|
Oh right no thats not the case.
I can alter the heights of the suspension and change the ccf file but the edits dont alter anything on the vehicle. Good bye untrusted p38
Hello 15my Disco 4
Not forgotten you disco2!
|
| 7th Jul 2018 8:57 am |
|
|
greenlandrover
Member Since: 28 Jun 2018
Location: Stourbridge
Posts: 7
|
Does the ECU need a reset to take on the new values? Some ECUs do.
Not sure if you can issue a reset from the IID but you could disconnect the battery for a minute and then re-connect.
You'll probably have to reset the clock after battery disconnect though.
|
| 7th Jul 2018 9:16 am |
|
|
IndusD4
Member Since: 01 Dec 2011
Location: Sydney, NSW
Posts: 308
|
It's been a while since I changed the CCF but I thought after you changed a setting, you had to exit the car configuration mode then the tool would ask if you want to upload the new file to the car - asking you a yes/no. Was that done? 2016 D4 TDV6 Corris Grey
IIDTool BT
|
| 7th Jul 2018 9:19 am |
|
|
ty-george
Member Since: 08 Jan 2018
Location: Derbyshire
Posts: 82
|
Yes and it took control and turned the engine off and cycled the ignition a few times then said upload successful. Next time engine is started, start it, stop it, and re start it. All of which i did. Good bye untrusted p38
Hello 15my Disco 4
Not forgotten you disco2!
|
| 7th Jul 2018 9:22 am |
|
|
IndusD4
Member Since: 01 Dec 2011
Location: Sydney, NSW
Posts: 308
|
I'd try it with a setting that for sure doesn't require any additional hardware, for example "global closing". Turn that off (or on) then save and upload it, see if that works, then put it back again as it was. 2016 D4 TDV6 Corris Grey
IIDTool BT
Last edited by IndusD4 on 7th Jul 2018 10:18 am. Edited 1 time in total
|
| 7th Jul 2018 9:28 am |
|
|
ty-george
Member Since: 08 Jan 2018
Location: Derbyshire
Posts: 82
|
Ok, i tried horns on alarm. That didnt work either, i will try global closing as i know that works currently. Thanks, ill be back! Good bye untrusted p38
Hello 15my Disco 4
Not forgotten you disco2!
|
| 7th Jul 2018 9:29 am |
|
|
ty-george
Member Since: 08 Jan 2018
Location: Derbyshire
Posts: 82
|
Sorry greenlandrover, didnt see you post. I didnt read anything about this in the manual, but if thats whats needed ill try it? Good bye untrusted p38
Hello 15my Disco 4
Not forgotten you disco2!
|
| 7th Jul 2018 9:31 am |
|
|
