C6REW
Member Since: 10 Mar 2007
Location: Devizes, Wiltshire
Posts: 576
  
|
| Severe Polishing on my RV |
|
On another thread I explained how you can use the Porter Cable (PC) polisher to get rid of swirls. I see some of you think this is pointless. That's OK of course.
This was done with a combination of some special polishes and waxes for RV's. The PC is used with different foam pads for each part of the process. I tried to polish the RV by hand last year using T Cut and polish and after a weekend of torture I had only achieved a fraction of what you see here.
https://s3-eu-west-2.amazonaws.com/i.hubnu...5ce7fc.jpg
https://s3-eu-west-2.amazonaws.com/i.hubnu...612a8a.jpg
https://s3-eu-west-2.amazonaws.com/i.hubnu...890ca4.jpg
Above piccies where taken a couple of hours in. The stunning bit for me was the bottom dark grey area. This paint has been very mottled since I bought the RV and further investigation shows this is common. The paint just fell off as I was polishing.
Nackered now and enjoying a glass of red! Will continue with the efforts tomorrow. If I have time I may do the bonnet of the Disco.
Regards
Chris
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated 
Last edited by C6REW on 28th Apr 2007 6:51 pm. Edited 1 time in total
|
 28th Apr 2007 6:35 pm |
|
|
mick
Member Since: 21 Jan 2007
Location: Yorkshire
Posts: 2049
  
|
cant see a RV 
|
| 28th Apr 2007 6:47 pm |
|
|
C6REW
Member Since: 10 Mar 2007
Location: Devizes, Wiltshire
Posts: 576
|
Thanks Mick,
Should work now
Chris
|
| 28th Apr 2007 6:51 pm |
|
|
mick
Member Since: 21 Jan 2007
Location: Yorkshire
Posts: 2049
|
|
| 28th Apr 2007 6:59 pm |
|
|
