mabanks
Member Since: 09 Apr 2008
Location: hertfordshire
Posts: 33
|
Hi all,
Had my MY14 HSE for 2 months and 2000 miles now, it's a great car and better in all respects than the '07 D3 than went before.
But....There area couple of things that are winding me up that I wonder if anyone else has experienced?
Occasionally I can open the car and the drivers seat has moved as far forward as it can go, it doesn't move as I unlock, it must have moved when I locked it.....crazy, also, after one of these random seat moves, it switches on the heated steering wheel.
Second thing is rattle and squeaks, driving me nuts. Seems to be centre console and glove box area. I've noticed the quality of plastics doesn't seem to be as good as the D3, I can flex pretty much any area of the dash/console and it moves and creaks.
The car is booked in for a couple of days to get these looked at, but I'd be interested to hear any forum opinion or personal experience .
|
17th Jul 2014 1:07 pm |
|
|
DaveC
Member Since: 29 Sep 2009
Location: Wirral
Posts: 1034
|
i thought i had similar problem with seats but it turns out i was just knocking the mem seat postion switch as i got out.
if your sure its not that it sounds like a dealer visit to check for gremlins! XC90 T8 R Design Pro
MY14 D4 HSE Lux (sadly gone)
Mariana Black with Ivory interior and lots of toys!
|
17th Jul 2014 1:33 pm |
|
|
steveraspberry
Member Since: 18 Sep 2011
Location: Nr Sevenoaks,Kent
Posts: 2081
|
As far as the seat position issue goes, it can be as mentioned above, just catching the memory position buttons with your elbow, it's not that uncommon. Another thing is have you checked the the round switch on the left of the steering column ? If it's not switched to auto, the seats won't move when you open the drivers door. Not sure how relevant this is to your current problem but might be worth checking?
HTH
Best,
Steve My17 Volvo XC90 Inscription
MY15 Mitsubishi L200 Barbarian
RGK Tiga Fx Wheelchair,
Large Alsation called Abbs
Medium blue Staffie called Piglet
Medium Alsation called Bailey
Last edited by steveraspberry on 26th Aug 2014 10:25 am. Edited 1 time in total
|
17th Jul 2014 1:52 pm |
|
|
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
|
And another vote for hitting the memory button when getting out As I am the only driver I now have all the memory button programmed the same so it make no change whichever one I hit Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
|
17th Jul 2014 2:17 pm |
|
|
Tiger
Member Since: 13 Mar 2006
Location: Wales
Posts: 490
|
Quote:Second thing is rattle and squeaks, driving me nuts. Seems to be centre console and glove box area. I've noticed the quality of plastics doesn't seem to be as good as the D3, I can flex pretty much any area of the dash/console and it moves and creaks
Yep, mine's got this feature.
I need Mrs Tiger to drive while I find it..
|
17th Jul 2014 2:19 pm |
|
|
Gareth
Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26774
|
Here's a curve ball - you haven't got a cd or dvd in the drivers door bin have you? I thought I was going mad when my seat appeared to be going crazy, it would lift up th the highest setting. I would hit 1 on the memory pad, and all would return to normal. Then the next time the seat was all the way up.
The reason was, the cd rom case was catching under the seat adjust switch when the door was closed, and lifted the seat up.
Rattles and squeeks, mine has just been in the dealers for second service, and rectification of a rattle in the centre dash area. 4 days later, they had stripped the entire dash out to find a stray screw rolling around in there. Now its rattle free!
|
17th Jul 2014 3:12 pm |
|
|
mabanks
Member Since: 09 Apr 2008
Location: hertfordshire
Posts: 33
|
Thanks all,
I've set all memory positions to the same and turned off the auto wheel adjust just to be sure, will let you know how things go.
|
18th Jul 2014 10:26 am |
|
|
Skep
Member Since: 04 Dec 2007
Location: between Sheffield, Chesterfield, Worksop and Mansfield
Posts: 651
|
I had a dash rattle on my MY12 D4, turned out to be the centre speaker not being seated properly, land rover removed and refitted and it's been fine since!
Skep '16 Volvo XC90 R Design Bursting Blue (Vera)
'12 Discovery 4 3.0 SDV6 HSE Fuji White (Daz - Gone
'10 Discovery 4 3.0 TDV6 HSE Santorini Black (Vinnie - Gone)
'07 Discovery 3 2.7 TDV6 SE Stornoway Grey (Gone)
Club Side Skeps
|
18th Jul 2014 12:13 pm |
|
|
DG
Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50978
|
The speaker squeak is known
Quote:Reference SSM71901
Models Discovery 4 / L319
Range Rover Sport / L320
Title Dash Topper Pad Creak 10 MY Onwards
Category Body
Last modified 03-Jul-2014 00:00:00
Symptom 107000 Interior Trim
Content
Issue:
Customer complaint of noise from facia when travelling over certain road conditions.
Cause:
JLR engineering have found during their investigations that the instrument panel upper section speaker aperture bolt may have a relaxed torque (See TOPIx workshop manual section 76.46.04 Fig. E12471)
Action:
Release the instrument panel upper section speaker aperture bolt and over torque back to 13Nm 21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
|
18th Jul 2014 12:25 pm |
|
|
FenRob
Member Since: 24 Mar 2014
Location: Fenland, Cambs
Posts: 130
|
"Relaxed torque" is a fantastic way of saying "loose"...
|
18th Jul 2014 1:59 pm |
|
|
L319
Member Since: 14 Dec 2013
Location: Herefordshire
Posts: 2083
|
When doing FMEA at work we were always told to state failures in none emotive terms so that if they ever had to be read out in court should the company was sued it would sound neutral. You never said something could catch fire, it would be a thermal event or such term
|
18th Jul 2014 2:14 pm |
|
|
promitheus
Member Since: 04 Jul 2009
Location: Afidnes, Greece
Posts: 572
|
Have the same squeak between the glove box (hinge) and centre console. It's stopped now in summer, but I have bought a Squeak and rattle kit just in case it reappears in winter.
Regarding your seat, I'm pretty certain that you have to keep the memory button pressed till it moves to the end position, so touching one of these when getting out of the car shouldn't move it so much.
|
19th Jul 2014 7:24 am |
|
|
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
|
promitheus I suggest you try pushing one of your memory buttons to see that is not how they work Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
|
19th Jul 2014 6:30 pm |
|
|
promitheus
Member Since: 04 Jul 2009
Location: Afidnes, Greece
Posts: 572
|
You are absolutely right, Ian...
|
20th Jul 2014 8:24 am |
|
|
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
|
Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
|
20th Jul 2014 8:29 am |
|
|