Member Since: 26 Mar 2013
Location: Saddleworth
Posts: 27
PLEASE CAN SOMEOME HELP TIMING QUESTION
how do
right cut a very long story short
TDV6 stopped on road no bang no nothing, sent to garage 3 weeks later found nothing
they said they had checked the timinig belt and found it to be three teeth out can this be possible, iv never know a belt to split, snap yes.#
SO if it had slipped three teeth what can it have done damaged wise it turns over great no bangs etc
iv found the problem why it stopped myself so that's sorted
im going to the garage to now check they have put the timing belt right or they have cocked it up and put it three teeth out.
any help advice would be great
Not heard of that one myself as well,, It would not run if it was and also it would have damaged the engine if it was three teeth out.
It sounds to me like they did not know how to time it up the correct way and when they applied the tensioner it looks to them that the timing was out by the three teeth they are quoting.
This would be about the correct number of teeth if the cams and pulleys where not setup proper for alignment.
Flack
21st Jul 2014 9:14 am
SHARKYSHARKS
Member Since: 20 Dec 2008
Location: Saddleworth Oldham
Posts: 1954
Where did you take it to 121 MY18 D5 HSE LUX😎
MY12 Freelander SD4 HSE
44 Tonne 12 Litre 6x2 Scania T cab (Current)
Freelander 1 (Wrote off 😫)
Ex D1
Ex D2 GS
Ex V8 D2 GS
Ex D3 S
Ex D4 GS
Club skip ya lockers !!!
Club BAS remote heater !!
Club Duratrac
Club Phillips DRL
Club Prospeed Rack Mk 1
Club Prospeed Rack Mk 2
Club Sankey
Club RLD spare wheel protector
21st Jul 2014 10:41 am
jonnybgud
Member Since: 18 Dec 2013
Location: Leicestershire
Posts: 397
I wouldn't let anyone else mess about with it, Flack is the TDV6 cambelt God! and not all that far away from you, if you want it done right, he is the man to see Admin on Facebook Discovery 3 & 4 Ownersgroup
Cambelt, Fuel Pump Belt, Oil Pump & Water pump replaced by Flack
Member Since: 26 Mar 2013
Location: Saddleworth
Posts: 27
Is that you dave how's the bull nose doing.
Iv done all the timing replaced the belt everything is set as it should check the phillies etc all new tensioner a fuel pump belt sorted waiting for new battery and I'll give you an update tonight or tomorrow.
Flack
Cheers for the reply iv never Hurd of a belt slipping like I said iv set it up myself now so I know its all right. Let's just see what she does tonight or tomorrow can you get the heads off without taking the engine out of these stupid things
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
