| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
jez33m
Member Since: 13 Feb 2007
Location: kent
Posts: 48
  
|
Hi everyone, Can anyone tell if fitting towing electrics is a easy DIY job or should it be done at a dealership!! 
|
 21st May 2007 2:06 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
Do a search on here, there are soem instructiosn here and on the LR download site, seems as long as you can clip a few clips, you'll be fine. (and save yourself a ton!) Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 21st May 2007 2:08 pm |
|
|
NoDo$h
Member Since: 02 May 2006
Location: Finding new and exciting ways to milk badgers.
Posts: 19689
|
It's straightforward enough to follow the instructions, but you need a little bit of agility to get the cable neatly tucked behind the pendulum/counterweight behind the NSR bumper. Apart from that, it's a doddle.
Should be around half and hour to an hour, depending on how long it takes you to find your screwdrivers and whether or not you have rear light guards fitted. I know it's not considered "kind" to say no these days, but no. Just no, ok? And if it's not ok, still no.
|
| 21st May 2007 2:23 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
