Member Since: 20 Sep 2013
Location: Wales
Posts: 14
Thanks Motolab for the fast response
yes I have updated the BCM and I have the 3 flash indicators
just didn't see MY10 option in GAP tool only reverse camera on/off
just wondering if the CCF edit should have given options other than click it for on (green)
all options seemed to be enabled or disabled, thought it may have said on off MY10
thanks
12th Nov 2022 6:35 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10738
I don’t think it’s that.
The options you should have is no, yes,
MY10 if you scroll further.
If you aren’t seeing this, then it’s the gap iid firmware that needs an update. Is it old ?
Read my posts here and it will tell you what is the minimum gap firmware required
Member Since: 20 Sep 2013
Location: Wales
Posts: 14
Fantastic, all sorted camera works a treat, thanks so much for the help
Think I will tackle the DAB next
13th Nov 2022 2:45 pm
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
Congrats!
If you get DAB to work, please write a how to please, as i tried a lot, with a OEM LR unit, with an aftermarket unit, never got it functioning.. the LR D3 my06 buildt in ‘05 does not see the DAB unit on the most bus, so the D4screen buttons do not work (although active) after activating them in the ccf..Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
13th Nov 2022 6:47 pm
Dunc101
Member Since: 14 Sep 2018
Location: Bedfordshire
Posts: 4
screen bench test?
Hi all - ive only just found this thread - fantastic! I thought id give it a go, but failing at the first hurdle.
I followed Flacks pfd, but no joy. No life in the D4 screen. I bench tested for basic power, and it didn't come to life. I assumed a bad screen. But Ive a spare D3 screen, so installed it in the car - it works. Out and on the bench, it doesn't.
Really basic question - if I want to bench test my sat nav screen, with 12v power supply, pins 1 and 3 are power and earth on the D3 screen, and pins 8 and 11 are power an earth on D4 screen. Correct?
So in my house on a bench test, on a D3 screen, I should be able to connect the +12v from my transformer to pin 1, and the -12v from my transformer to pin 3.
The screen should then fire up?
Im guessing im doing something fundamentally wrong - because the screen isn't firing up, but it does in the car...
(re)education please!
10th Mar 2023 5:53 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10738
Think you are missing the ignition supply. Or assessory ICE enable supply
It should display the LR logo.
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
31st May 2023 8:39 pm
Math43
Member Since: 23 Dec 2020
Location: LYON
Posts: 21
I've already read Flack manuel, it's not the point, it's more about the model of my camera.
About effort as you say, I find my camera ref is LR051728 and it's part og 360 camera setup of LR4 and I think it will not work as regular camera as on LR4 there is a camera ecu between cameras and screen and there is more wires as regular camera.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
