Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
pinchy wrote:
If you could get the interior fans going that would be ideal.
LINK to webasto TC3 SMS instructions, to save others time if they are looking.
What I did on a D1 and a D2 was to connect direct to the heater fan via resistor for speed and a diode to stop any power getting back to the webasto.
Ive used mine a couple of times this year (with the bas remote) and miss the clear screen I got with the old cars.
Does anyone know if the D3 webasto has an out signal once the heater is running capable of triggering a relay?
15th Feb 2016 4:47 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18561
D3 fans cannot be controlled using a simple 12V supply, relayed or not.06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
15th Feb 2016 5:44 pm
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
Martin I said relay as I was thinking of the output from the webasto is likely to not have enough grunt to drive the fans directly hence the relay.
If you have the Danhag system installed on your car you can control the fans via a IPU, this has a potentiometer that needs adjusting for the correct speed of the fans.
This allows you after a period of time to set the fans blowing in the cab after the FBH has been running for a set time.
As far as I know this is the only system that offers this.
Flack
15th Feb 2016 6:50 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18561
The fans are PWM controlled, so a simple voltage injection will not work.
The Danhag IPCU emulates the PWM signals which drive the fan.06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
17th Feb 2016 3:37 pm
dubbs
Member Since: 18 Apr 2012
Location: Gloucestershire
Posts: 3626
I want to install something like this in my D4. I have ParkHeat/Vent at the moment but would prefer to control with my phone and a dedicated app than another remote in case the remote range isn't close enough for me to activate when required.
Will the webasto control vent and fbh on the D4 or is my only option the additional remote and "official" LR system for this?
Thanks in advance....MY15 DIY Black Pack (Better than factory and half the price!)
Prospeed rock/tree sliders w/steps
HSE Winter wheels
TransK9 B24
Travall Cargo Guard
Hatchbag
19th Feb 2016 6:30 am
dubbs
Member Since: 18 Apr 2012
Location: Gloucestershire
Posts: 3626
For clarity... I've not installed the LR remote system, at the moment I can only set with timers.MY15 DIY Black Pack (Better than factory and half the price!)
Prospeed rock/tree sliders w/steps
HSE Winter wheels
TransK9 B24
Travall Cargo Guard
Hatchbag
19th Feb 2016 6:31 am
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18561
Short answer is yes I think you could fit the ThermoCall system instead of Telestart (factory remote)06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
24th Feb 2016 12:20 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
I think you can fit both.
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18561
Yes there is no reason why both can't fitted, dubbs did ask about using it instead 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
24th Feb 2016 1:11 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
I seem to recall a Y-splitter coming with the kit to cater for vehicles with a remote already fitted, so it all just plugs together.
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 16 Jan 2012
Location: South Yorkshire
Posts: 872
dubbs wrote:
Will the webasto control vent and fbh on the D4 or is my only option the additional remote and "official" LR system for this?
I would also be interested in knowing if this is possible if you are going to give it a go.
Although even if others succeed , I'm sure my car will put up a fight and try to resist the changes
2nd Mar 2016 9:32 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
There is no 'official Land Rover' kit, as in reality it is all Webasto stuff strung together, plus a minor tweak of the configuration file on the vehicle.
Putting this stuff in a D4 is dead easy.
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 16 Jan 2012
Location: South Yorkshire
Posts: 872
Dead easy for some no doubt.
I'll wait until others have done it and hopefully documented the procedure as I'll probably end up buying the only unit that's not compatible with my D4
2nd Mar 2016 10:18 pm
kineland
Member Since: 15 Jul 2014
Location: cavaillon
Posts: 188
module gsm
bonjour
il y a plusieurs modéles chez Danhag de 478euros a 175 euros!!! lequel est bon pour le disco3?
MERCI
Philippe
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
