Maxarn58
Member Since: 24 Dec 2011
Location: Sollentuna, north of Stockholm
Posts: 225
|
Mikey..
My navigator doesn´t give a arrival time,
just how many minutes until I arrive..
So I still need a clock..
Or have I missed something in the settings
of the navigation?
Rgds
Uffe RRS MY2006 HST
As a rule, I always resist temptations,
unless they are irresistible!!
|
 21st Jan 2015 7:40 pm |
|
|
DSL
Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73089
|
I don't have satnav so have to dust off the brain cells to get arrival time. Or use the TomTom app on the iDog&bone. 
|
| 21st Jan 2015 7:43 pm |
|
|
Redgull
Member Since: 30 Aug 2013
Location: East Sussex
Posts: 1127
 
|
uffe,mine does,my say nav tells me how long left of my set journey in minutes/ hours
|
| 21st Jan 2015 8:09 pm |
|
|
anglefire
Member Since: 09 Mar 2010
Location: In the Club House
Posts: 4180
|
If you go into the config you can change what it displays - either time of arrival or the run time left. Mark.
2006, D3 SE Auto - gone but not forgotten.
2014 BMW 530d M Sport Tourer.
1977 Triumph Spitfire 1500
_________________________________________________
Disco Picture Website Here
|
| 21st Jan 2015 8:11 pm |
|
|
|
|
Nodge68
Member Since: 05 Sep 2014
Location: Newquay
Posts: 1014
|
Redgull wrote:seems it could be more hassle than its really worth, after all its only a clock!!
The COD was the first upgrade I did when my IID arrived. I've found that all the stupid pointless bongs have vanished when my new clock appeared. I still get the key in ignition bong but nothing else. The update was worth doing simply for that.  Freelander SE 2005 Auto.
D3 TDV6. Gone.
|
| 21st Jan 2015 8:48 pm |
|
|
Redgull
Member Since: 30 Aug 2013
Location: East Sussex
Posts: 1127
|
if its a mod with no side affects i will get it done, dont want anything going wrong with the car because of it. everybodies replies have been interesting
|
| 21st Jan 2015 9:00 pm |
|
|
Anthony
Member Since: 09 Jan 2015
Location: Worcestershire, Oxford and Beijing.
Posts: 34
 
|
So, just to confirm before I do this too...
The clock on dashboard can be activated but if using an older version of the software leaves you with a 'lights on' warning displayed in the FBH 'on' warning lamp.
If the updated software is used to enable the clock, a low coolant warning will appear even if the coolant level is correct. To overcome this problem, a new coolant bottle is needed.
Really?! 
|
| 22nd Jan 2015 3:18 am |
|
|
anglefire
Member Since: 09 Mar 2010
Location: In the Club House
Posts: 4180
|
Only if the coolant bottle has a faulty float as I understand. Mine didn't have the problem when it was done ages ago.
I would rather know I had low water than not.............. Mark.
2006, D3 SE Auto - gone but not forgotten.
2014 BMW 530d M Sport Tourer.
1977 Triumph Spitfire 1500
_________________________________________________
Disco Picture Website Here
|
| 22nd Jan 2015 6:48 am |
|
|
anglefire
Member Since: 09 Mar 2010
Location: In the Club House
Posts: 4180
|
Oh and any version of firmware to add COD can give the low water warning. Mark.
2006, D3 SE Auto - gone but not forgotten.
2014 BMW 530d M Sport Tourer.
1977 Triumph Spitfire 1500
_________________________________________________
Disco Picture Website Here
|
| 22nd Jan 2015 6:49 am |
|
|
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20844
 
|
Anthony wrote:So, just to confirm before I do this too...
The clock on dashboard can be activated but if using an older version of the software leaves you with a 'lights on' warning displayed in the FBH 'on' warning lamp.
If the updated software is used to enable the clock, a low coolant warning will appear even if the coolant level is correct. To overcome this problem, a new coolant bottle is needed.
Really?!
If you have the IID, the lights on warning can be disabled with the correct firmware
Almost any IPC Reflash can bring up the low coolant warning, but only if you have a faulty float
My D3 Build Thread
TDV8 Retrofit Build Thread
|
| 22nd Jan 2015 6:59 am |
|
|
Anthony
Member Since: 09 Jan 2015
Location: Worcestershire, Oxford and Beijing.
Posts: 34
|
Got it.
So the low coolant warning comes on if the float is faulty rather than there necessarily being low coolant. The updated software is a little more sensitive then perhaps?
Low coolant on a British car? I hear echos of HGF on K-Series engines...
Anthony.
|
| 22nd Jan 2015 7:13 am |
|
|
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20844
|
The old warnings were written out of the firmware, as the floats going porous, and sinking was a hugely common issue. Instead of replacing them all, they disabled the warnings
The updated software reinstated the warning, along with a modified bottle/float being fitted when new My D3 Build Thread
TDV8 Retrofit Build Thread
|
| 22nd Jan 2015 7:25 am |
|
|
Nodge68
Member Since: 05 Sep 2014
Location: Newquay
Posts: 1014
|
I got no low coolant warnings when I did my COD update. From Mikey's description, it sounds like LR couldn't be bothered to fix the float issue so modified the software to disable the coolant warning instead. Freelander SE 2005 Auto.
D3 TDV6. Gone.
|
| 22nd Jan 2015 7:39 am |
|
|
Maxarn58
Member Since: 24 Dec 2011
Location: Sollentuna, north of Stockholm
Posts: 225
|
Thanks guys..
I have just changed so that the Navigator shows arrival time..
And has a qwerty-board..
What stuff there is, if You only look hard enough..
(Or read t h a t manual as well..)
Rgds
Uffe RRS MY2006 HST
As a rule, I always resist temptations,
unless they are irresistible!!
|
| 22nd Jan 2015 11:16 am |
|
|
