- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
David King
Member Since: 15 Jun 2007
Location: Hills District Sydney
Posts: 11
  
|
I am sure this has come up on the list before but does anyone have alternatives (to Dealer) for rubber floor mats / loadspace protector? I am using the ones from my now traded L2 which don't quiet fit. A template to use at Clark Rubber would be helpful.
Thanks
Do we have an Oz equivalent supplier to the UK?
|
 18th Jun 2007 5:01 am |
|
|
White Disco
Member Since: 15 Jan 2007
Location: Gondwana. It's raining. We'll All be roon'd.
Posts: 1463
|
You could try one of the coal fired power stations around The Hunter. They throw out KMs of conveyor belting each year. You will need a decent hacksaw to cut it though as it is thick and has wire reinforcement.
I nicked, sorry, acquired some from Yallourn Open Cut coal mine and it is really good for toughness and if it gets wrecked I'll nick, sorry, acquire some more.
I think they are glad to get rid of it to me.
Cheers,
David. Did you think I would leave you crying,
When there's room in my D3 for 7,
Climb in here Joe we'll soon be flying,
I can go just as fast with 7.
2005 TDV6 S with Terrain Response (& all that entails), Tasmods (gorn). 2008 TDV6 HSE (gone). A Dark Side umbrella (here) & car (here).
Volkswagen Golf (SWMBO's)
Datsun Insult (SWTSMBOBIO22SHOMSAH)
Datsun Insult (SWTSMBOBIO19SHOMSAH)
4 BMW's (Stents, not the silly cars)
Formerly RED DISCO
|
| 18th Jun 2007 5:16 am |
|
|
|
|
mobyone
Member Since: 23 Dec 2005
Location: Melbourne
Posts: 394
|
David,
I asked for trade price from LR dealer and got them for around $280 (front and rear) (better than the $500+ list price  ) , then I sold my D2 mats for $180 on Ebay... 
Just the other week spare parts guy was only too happy to reduce price of Konig chains for me from $380 to $305 and I didn't even ask for a discount  .
It can't hurt to ask..
Hope this helps What's the point.... it all comes out in the wash anyway!
85 Range Rover
01 Disco Series II
05 D3 V6SE, Bonatti Grey, 19"alloys
|
| 18th Jun 2007 7:13 am |
|
|
caverD3
Member Since: 02 Jul 2006
Location: Oberon, NSW
Posts: 6922
 
|
IMHO the clark rubber ones are the way to go. 
They can cover a bigger area and are much cheaper. Cut a teplate with some packing paper or thin cardboard, making sure it is little too big then cut it down when you are installing it; I cut mine what I thought was to size and found it was short in couple of places.  too late once it is cut. Just use a sharp knife.You can do a cut out under the seats and along the sides as well.
Place it smooth face up as it is easier to brush the dirt out when dry. “There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely gamesâ€
Ernest Hemmingway
D4 3.0 Active Diff, Adaptive Lights, High Beam Assist, Surround Cameras, Privacy Glass.
D3 2.7:Adaptive Headlights,Electronic Rear Diff,ARB Bar,Blaupunkt Speakers,JVC Powered Subwoofer,Removable Snorkel,Mitch Hitch,Pioneer After Market Head Unit,Steering Wheel Control Adaptor,Remote Adjustable Supension Rod System, Taxside Dual Battery System.
|
| 18th Jun 2007 7:35 am |
|
|
rover3
Member Since: 13 Feb 2007
Location: Geelong
Posts: 17
|
Hi All
Picked up some heavy rubber mats from Repco and cut them to size, cost about $12 each. I work in a Brown Coal Power Station and the problem with the Conveyor belt it gets impregnated with coal dust.
|
| 18th Jun 2007 8:02 am |
|
|
David King
Member Since: 15 Jun 2007
Location: Hills District Sydney
Posts: 11
|
Thanks
The Weathertech (navydevildoc)
mats look great but the nearest distributor is in New Zealand. I will use the template Clark Rubber route. Cheers
|
| 19th Jun 2007 6:15 am |
|
|
White Disco
Member Since: 15 Jan 2007
Location: Gondwana. It's raining. We'll All be roon'd.
Posts: 1463
|
rover3 wrote:
I work in a Brown Coal Power Station and the problem with the Conveyor belt it gets impregnated with coal dust.
Yes, nice colour isn't it. Matches the inside of my lungs.
Do You work at Anglesea? Did you think I would leave you crying,
When there's room in my D3 for 7,
Climb in here Joe we'll soon be flying,
I can go just as fast with 7.
2005 TDV6 S with Terrain Response (& all that entails), Tasmods (gorn). 2008 TDV6 HSE (gone). A Dark Side umbrella (here) & car (here).
Volkswagen Golf (SWMBO's)
Datsun Insult (SWTSMBOBIO22SHOMSAH)
Datsun Insult (SWTSMBOBIO19SHOMSAH)
4 BMW's (Stents, not the silly cars)
Formerly RED DISCO
|
| 19th Jun 2007 7:54 am |
|
|
DiscoAtom
Member Since: 28 Sep 2006
Location: Sydney
Posts: 142
|
I bought my loadspace matt from the local car accessory retailer, SuperCheap, (I think), the brand was Bushranger. The matt was a near perfect fit with minor trimming required near the hatch area. It is ribbed and there are numerous embossed lines along the edges to assist with cutting the edge to fit the shape of the load area. It cost me approx $45. '06 Disco 3 TDV6 SE Buckingham Blue
|
| 19th Jun 2007 10:38 am |
|
|
Baggy
Member Since: 11 Feb 2006
Location: sydney.....in the land of oz
Posts: 183
|
Dave, try the auto shops for floor mats - I picked up a full length rear floor mat (that you cut to fit) and its as good as the LR one. It was one of the chain auto stores (not supercheap, but one like that). I did have to shop around - also found some matching front floor mats. Unfortunately - bought the rear load space mat from LR (but it is good quality). '11 TDV6 - Stornoway Grey.... still lovin' it!!
REDUCE GREENHOUSE GASSES.......Eat more BEEF!!
Addendum: Red wine goes REALLY well with BEEF
|
| 19th Jun 2007 10:40 am |
|
|
rover3
Member Since: 13 Feb 2007
Location: Geelong
Posts: 17
|
Good Evening
To Red Disco yes I do.
Regards Rover3 
|
| 19th Jun 2007 11:26 am |
|
|
White Disco
Member Since: 15 Jan 2007
Location: Gondwana. It's raining. We'll All be roon'd.
Posts: 1463
|
I did quiet a bit of work on cores the old SEC did on coal from Angahook parish.
The belting I get has been lying out in the weather at Yallourn Nth for a while so when I get to it it's pretty clean in parts.
I would not use it for footwell mats though. Only the load space.
Cheers. Did you think I would leave you crying,
When there's room in my D3 for 7,
Climb in here Joe we'll soon be flying,
I can go just as fast with 7.
2005 TDV6 S with Terrain Response (& all that entails), Tasmods (gorn). 2008 TDV6 HSE (gone). A Dark Side umbrella (here) & car (here).
Volkswagen Golf (SWMBO's)
Datsun Insult (SWTSMBOBIO22SHOMSAH)
Datsun Insult (SWTSMBOBIO19SHOMSAH)
4 BMW's (Stents, not the silly cars)
Formerly RED DISCO
|
| 19th Jun 2007 11:32 am |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
