PeterTh
Member Since: 06 Sep 2013
Location: Alunda
Posts: 330
  
|
| Oil level sensor harness oil leak |
|
Dear gurus of this forum,
I recently changed the oil level sensor and its harness on my D4 2011. I must have busted the plug or its o-rings as I now have an oil leak from it. It was a very tight fit so I had some difficulty getting it in. I will try and see if I can get it out without removing the sump. It should be possible to change the o-rkngs from the outside. Otherwise I need to do the whole procedure once again...
Question for you guys doing this regularely, is there a trick to get the plug into the sump in a more gentle way? Do you think it would be possible to seal it from the outside?
Thanks,
Peter 2011 Discovery 4 3.0 TDV6 S Automatic
1999 Discovery 2 V8 ES Automatic
Earlier
2006 Discovery 3 TDV6 SE Automatic
1996 Discovery 300 Tdi ES Automatic
1975 Series 3 2.25 diesel
Nanocom Evolution for D2 V8, D3 and D4
Working kelpies for working the sheep
 
|
 26th Dec 2020 11:04 am |
|
|
