Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Maintenance & Mods (D3)

EGR blanking and remap questions
Post Reply  Down to end
Page 2 of 3 <123>
Antjp
 


Member Since: 09 Aug 2013
Location: Warringon
Posts: 349

England 2005 Discovery 3 TDV6 HSE Auto Zambezi SilverDiscovery 3

geoff. wrote:
tayaste wrote:
This is just my opinion. I have a remap and patch with emulators. Since having it done the only thing I had to do was replace my large intercooler hose.
I did have an EGR fault and that is why I had the ?emulators fitted. I already had the BAS remap.

If it was me, I would definitely get the remap but wait until the EGR's need replacing to do that job. But like I said, that's just my opinion.


And why wait for the egr,s to fail in some far away place ,that doesn't make any sense to me and that s just my opinion Thumbs Up

Ps also BAS remap and no need for egr patch it's a 2005 and not needed


If I only knew, i'd of blanked my egr's and removed the butterfly from new. I did it at 105,000 miles and my plastic plenum chamber was carboned up . It was a rite bit of work cleaning it up.
I cant comment on remapping because ive never done it to mine, or drove 1 with it done.
8)
  
Post #158413029th Dec 2015 1:21 am
View user's profile Send private message View poster's gallery Reply with quote
geoff.
 


Member Since: 24 Jan 2010
Location: West kent
Posts: 8531

England 

D16PJM wrote:
does the remap make a noticeable difference.

Ps Geoff I hope you have small hands as I cant see me being able to do the egr blank.


No problem,and dont go buying blanking kits I use my own Thumbs Up
  
Post #158413129th Dec 2015 2:00 am
View user's profile Send private message View poster's gallery Reply with quote
Bodsy
Site Sponsor 


Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361

United Kingdom 2007 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3

Lid wrote:
I remain very happy with the results and no physical work was done on the EGRs.


So they're not blanked off and the butterfly valve not removed....?
 Bodsys Brake Bible

D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling


Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here 
 
Post #158416729th Dec 2015 9:10 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Bodsy
Site Sponsor 


Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361

United Kingdom 2007 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3

jobster wrote:
I have a BAS remap and can recommend it. But: is it now possible to blank the egr on a 2009 D3?

Yes, it is now possible. As you've got the remap via IID, Speak to BAS and buy the add on for the EGR blank software update. Thumbs Up
 Bodsys Brake Bible

D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling


Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here 
 
Post #158416929th Dec 2015 9:12 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Lid
 


Member Since: 26 Apr 2013
Location: Welwyn Garden City
Posts: 255

United Kingdom 2008 Discovery 3 TDV6 XS Manual Siberian SilverDiscovery 3

Bodsy wrote:
Lid wrote:
I remain very happy with the results and no physical work was done on the EGRs.


So they're not blanked off and the butterfly valve not removed....?


No - an electronic code was applied that allegedly shuts the EGRS and switches them off. The diagnostics afterwards apparently confirmed the EGRS are 100% not open and not operating.

Now I have no idea how to validate this, nor if it will prevent any future EGR issues. However I no longer have any acceleration lag and so far I have not had anything EGR related happen.
  
Post #158418729th Dec 2015 10:03 am
View user's profile Send private message View poster's gallery Reply with quote
Lost for Words
 


Member Since: 03 Sep 2013
Location: Warminster, Wiltshire
Posts: 6703

United Kingdom 2006 Discovery 3 TDV6 HSE Auto Zambezi SilverDiscovery 3

You need to remove the butterfly, and I'd fit some plates if I were you... Thumbs Up
 Current: Discovery 3 06MY (55 reg) HSE Auto Zambezi Silver Zambezi Silver Allisport Fast Road Intercooler, V8 Brakes, Silicone IC Hoses, EGRs Blanked, Remapped, De-Cat pipe, FBHIC
Freelander 2 2007 HSE Manual Tambora Flame
Previous: FL2 56 reg SE Manual Black (written off Sad )
Disco 3 06 reg B7S Manual Rimini Red Rimini Red
Disco 2 TD5 Y reg ES Manual Blue - Chipped Very Happy
Several Discovery 300 TDis
 
 
Post #158419029th Dec 2015 10:10 am
View user's profile Send private message View poster's gallery Reply with quote
Disco_Mikey
 


Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20829

Scotland 2005 Discovery 3 TDV6 HSE Auto Cairns BlueDiscovery 3

Lid wrote:
Bodsy wrote:
Lid wrote:
I remain very happy with the results and no physical work was done on the EGRs.


So they're not blanked off and the butterfly valve not removed....?


No - an electronic code was applied that allegedly shuts the EGRS and switches them off. The diagnostics afterwards apparently confirmed the EGRS are 100% not open and not operating.

Now I have no idea how to validate this, nor if it will prevent any future EGR issues. However I no longer have any acceleration lag and so far I have not had anything EGR related happen.


You can't, is the short and simple answer Thumbs Up

Just because the valves have been written out, does not mean they are 100% shut, regardless of what the diagnostics are saying...
 My D3 Build Thread

TDV8 Retrofit Build Thread 
 
Post #158423029th Dec 2015 12:25 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Lid
 


Member Since: 26 Apr 2013
Location: Welwyn Garden City
Posts: 255

United Kingdom 2008 Discovery 3 TDV6 XS Manual Siberian SilverDiscovery 3

Is it straightforward to blank an 08 model now, or do I have to do something else too?
  
Post #158424229th Dec 2015 12:55 pm
View user's profile Send private message View poster's gallery Reply with quote
Lost for Words
 


Member Since: 03 Sep 2013
Location: Warminster, Wiltshire
Posts: 6703

United Kingdom 2006 Discovery 3 TDV6 HSE Auto Zambezi SilverDiscovery 3

If the software is already done correctly, then it's just the blanks and butterfly removal which is the same as the others. Thumbs Up
 Current: Discovery 3 06MY (55 reg) HSE Auto Zambezi Silver Zambezi Silver Allisport Fast Road Intercooler, V8 Brakes, Silicone IC Hoses, EGRs Blanked, Remapped, De-Cat pipe, FBHIC
Freelander 2 2007 HSE Manual Tambora Flame
Previous: FL2 56 reg SE Manual Black (written off Sad )
Disco 3 06 reg B7S Manual Rimini Red Rimini Red
Disco 2 TD5 Y reg ES Manual Blue - Chipped Very Happy
Several Discovery 300 TDis
 
 
Post #158425029th Dec 2015 1:17 pm
View user's profile Send private message View poster's gallery Reply with quote
Bodsy
Site Sponsor 


Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361

United Kingdom 2007 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3

I suspect that the software update you've had generically deletes 26fault codes inc overboost, low fuel pressure, high fuel pressure amongst others...
Not the safest way t do it IMHO...
 Bodsys Brake Bible

D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling


Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here 
 
Post #158425829th Dec 2015 1:53 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Lid
 


Member Since: 26 Apr 2013
Location: Welwyn Garden City
Posts: 255

United Kingdom 2008 Discovery 3 TDV6 XS Manual Siberian SilverDiscovery 3

Well I don't know. I had a fuel pressure problem some time after this was applied which showed up on diagnostics.
  
Post #158426329th Dec 2015 1:58 pm
View user's profile Send private message View poster's gallery Reply with quote
jobster
 


Member Since: 08 Jul 2012
Location: Hilversum
Posts: 591

Netherlands 2009 Discovery 3 TDV6 SE Auto Unknown ColourDiscovery 3

Bodsy wrote:
jobster wrote:
I have a BAS remap and can recommend it. But: is it now possible to blank the egr on a 2009 D3?

Yes, it is now possible. As you've got the remap via IID, Speak to BAS and buy the add on for the EGR blank software update. Thumbs Up


Thumbs Up
 RLD Sump Guard
GVIF & rear camera
New FBH via Dan
BAS Remap with IIDTool
 
 
Post #158455930th Dec 2015 12:35 am
View user's profile Send private message View poster's gallery Reply with quote
Ncallan
 


Member Since: 15 Sep 2018
Location: Tipperary
Posts: 53

Ireland 2008 Discovery 3 TDV6 Base 5 Seat Auto Java BlackDiscovery 3
Blank-remap-patch

Ok ...interesting tread .
I’m getting a EGR fault showing up on my IID ,
May be a stupid question but how do I blank -remap - and patch my EGR’s ????
Don’t spare the details.
  
Post #202922616th Feb 2019 8:01 pm
View user's profile Send private message View poster's gallery Reply with quote
Antjp
 


Member Since: 09 Aug 2013
Location: Warringon
Posts: 349

England 2005 Discovery 3 TDV6 HSE Auto Zambezi SilverDiscovery 3

There are blanking kits available. It’s been a while now since I blanked mine, if memory serves. , I removed the Metal pipes from both egr valves to black plastic inlet manifold. fitted some blanking plates, removed a flap from a butterfly valve. But left the unit in place. As for wires, everything’s still plugged in so as far as the ecu goes. It thinks it’s all working.
I cleaned my inlet manifold too. It was full crud from the egr valves recirculating exhaust gasses.
I have a early 2005 model. I didn’t need to remap anything or plug into a computer.
The 2008 models might be different. I don’t know that. At least it’s a starting point.
  
Post #202926816th Feb 2019 11:33 pm
View user's profile Send private message View poster's gallery Reply with quote
Ncallan
 


Member Since: 15 Sep 2018
Location: Tipperary
Posts: 53

Ireland 2008 Discovery 3 TDV6 Base 5 Seat Auto Java BlackDiscovery 3

Thanks for that ,
It’s a little more knowledge than I had earlier Thumbs Up
I see the kits on fleabay for £15 .
So if I fit this kit will my dash light up like a Christmas tree ? Shocked ,
Do I need a technician to fit a “patch “ ( whatever the hell that is ) and remap it ?
  
Post #202927317th Feb 2019 12:55 am
View user's profile Send private message View poster's gallery Reply with quote
Display posts from the last:  
Post Reply Back to top
Page 2 of 3 <123>
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site