When it gets warmer I am planning to clean the underside of "Bertha" and give her a good seeing to with a quality underseal.
Now I was going to use the old faithful Waxoil, but it has been mentioned to me that Dinitrol is a better product and offers better protection.
Any opinions on the best to use?
Jim
7th Mar 2016 2:14 pm
Discogaz
Member Since: 17 Mar 2014
Location: Bracknell
Posts: 1399
Heard the same but have had current D3 and previous D2 sorted my Rustsmaster at Hhatfield and Waxoyl was used both times. No complaints but Dinitrol is newer and may be a better formulation.
7th Mar 2016 2:26 pm
adam
Member Since: 20 Sep 2005
Location: Home and Happy
Posts: 6917
Only recommendation I can make is pay to get it done
Rustmaster appear to be the most recommended and they have an place in Hatfield
I had mine done at their Knutsford place 2 years ago and when local indy MOT'd it a couple of weeks ago he asked where it was done and how much I paid - commented whatever they charged it was worth it, best job they had seen
I don't have facilities to ramp up and do it all myself, but even if I did I wouldn't - understand it has to be the messiest job in Christendom.
Edit - beaten to a recommendation....
7th Mar 2016 2:28 pm
dlgis
Member Since: 02 Oct 2015
Location: Tunbridge Wells
Posts: 398
Is Rustmaster still in business? Had a Google and can't find a website. I'm going to have a look at mine on Friday when it's up on the ramp and if it's not too bad do the worst bits, but if it's not looking good I'll get a professional job done.D4 GS 12MY
9th Mar 2016 11:01 am
Discogaz
Member Since: 17 Mar 2014
Location: Bracknell
Posts: 1399
I was in there summer 2014 so he could have closed.
Try.
Rustmaster
Automative
Address: Unit 2, Symondshyde farm, Hatfield AL10 9BB
Phone:01707 274819
Hours: Open today · 7:30am–9pm
9th Mar 2016 11:18 am
adam
Member Since: 20 Sep 2005
Location: Home and Happy
Posts: 6917
Hmmmm...
Cant see it either?
Maybe closed down - I had mine done in Knutsford branch couple of years ago
Shame if they have gone, always appeared as highly recommended
9th Mar 2016 11:21 am
jonno1
Member Since: 16 Jun 2010
Location: SW London
Posts: 715
Companies House says they are in liquidation. Probably offered too much for too little. I remember Ziebart from the 70's. Superb stuff and many classics survive to this day because of it but they went bust too.
9th Mar 2016 8:43 pm
DrRobH
Member Since: 10 Oct 2015
Location: Hampshire
Posts: 927
Try Nene Overland
12th Mar 2016 9:43 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Put the club down and move out of the dank cave - use Dinitrol, a modern product that does not feel like you are taring the roof in the Shawshank Redemption.
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 11 Jan 2010
Location: NW Highlands
Posts: 5098
But if you do it with Waxoil you can sit and drink with the sun on your shoulders and feel like a free man; like the lord of all creation.Black 05 TDV6 HSE Auto
Grey 05 TDV6 HSE Auto (Gone)
54 TDV6 SE Man (killed by me )
12th Mar 2016 10:45 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Land Rover - Turning Drivers into Mechanics Since 1948
Robbie, having previously wax oiled 4 or 5 of my previous Landies I have to agree with you that it is time to move on. Have you ever used Dinitrol?
Jim
13th Mar 2016 9:16 am
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
All the chassis waxes are messy to apply, not hard to do at all though.
For the money you pay someone else, you can buy the compressor, the hose and the wax applicator and still have all the kit left over at the end.
Morris Ankor wax is much better than waxoyl.
Have heard good things about Dinitrol and the Bilt Hamber Dynax s-50
The other thing to bear in mind is the D3 chassis is a much simpler construction than the earlier land rovers with box section chassis with multiple strengthening plates fitted inside that all corrode and no matter what you use its hard to get anything between these plates to stop the rot.
So on a D3 a simple chassis wax will most likely do the job nicely.
13th Mar 2016 9:48 am
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
No box section chassis owner will miss this job
Worst of all Ive noticed the series 2 rear cross member is going the same way
13th Mar 2016 9:57 am
DrRobH
Member Since: 10 Oct 2015
Location: Hampshire
Posts: 927
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum