Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73121
Just fitted to mine, once you get hold of that connector it's a piece of cake, if slightly painful cake. Working all tickety boo. Just got to do my folks' car next w/end.
11th Oct 2016 11:00 am
PDC
Member Since: 20 Jul 2016
Location: Warwickshire
Posts: 174
Many thanks Ian, received mine today and fitted also...... Just need to get the FBH software activated and that is another job done to the car.2010 RR 5.0 Autobiography
2020 F-Pace SVR
2018 RRSport
2015 Disco XXV
2011 Disco 3.0
2008 RRS HST V8
11th Oct 2016 7:37 pm
PeterTh
Member Since: 06 Sep 2013
Location: Alunda
Posts: 330
2011 Discovery 4 3.0 TDV6 S Automatic
1999 Discovery 2 V8 ES Automatic
Earlier
2006 Discovery 3 TDV6 SE Automatic
1996 Discovery 300 Tdi ES Automatic
1975 Series 3 2.25 diesel
Nanocom Evolution for D2 V8, D3 and D4
Working kelpies for working the sheep
11th Oct 2016 8:34 pm
PDC
Member Since: 20 Jul 2016
Location: Warwickshire
Posts: 174
Many thanks to Bodsy, He came over today and activated the software to enable the operation of the FBH fob. All works just fine, just need some cold weather now to get the use out of it!!! 2010 RR 5.0 Autobiography
2020 F-Pace SVR
2018 RRSport
2015 Disco XXV
2011 Disco 3.0
2008 RRS HST V8
13th Oct 2016 12:57 pm
philm
Member Since: 02 Oct 2016
Location: Manchester
Posts: 732
Thanks Bodsy,
Got it next day, quick easy fit, just need to get it programmed now!
13th Oct 2016 4:53 pm
PeterTh
Member Since: 06 Sep 2013
Location: Alunda
Posts: 330
I have now fitted the transmitter and arial. I have also edited the CCF-file using my Nanocom but I can´t get it to work. Can someone help me understand what I have missed`
1. When teaching the remote I get the red light so should be ok. When pressing "ON" I get a stedy green light for a few seconds and than a slow green blink for some time before it stops. Reading the Webasto remote manual green means ventilation mode but I can´t seem to change to heating mode.
2. In the CCF-file I have changed (using a Nanocom):
Under "Heating and Ventilation"
a) Additianal heater is set to - Fuel fired parking heater
b) Callstart of parking heater is set to - Accesory only (via radio)
c) Park Heater is set to - Fitted
Still doesn´t work Ideas?
//Peter2011 Discovery 4 3.0 TDV6 S Automatic
1999 Discovery 2 V8 ES Automatic
Earlier
2006 Discovery 3 TDV6 SE Automatic
1996 Discovery 300 Tdi ES Automatic
1975 Series 3 2.25 diesel
Nanocom Evolution for D2 V8, D3 and D4
Working kelpies for working the sheep
15th Oct 2016 1:02 pm
PeterTh
Member Since: 06 Sep 2013
Location: Alunda
Posts: 330
Forget my question. It is working now
Now low battery warning...
//Peter2011 Discovery 4 3.0 TDV6 S Automatic
1999 Discovery 2 V8 ES Automatic
Earlier
2006 Discovery 3 TDV6 SE Automatic
1996 Discovery 300 Tdi ES Automatic
1975 Series 3 2.25 diesel
Nanocom Evolution for D2 V8, D3 and D4
Working kelpies for working the sheep
15th Oct 2016 1:40 pm
PDC
Member Since: 20 Jul 2016
Location: Warwickshire
Posts: 174
As far as I understand it, if you have a steady blinking green light when you press the on button, then that means the fob is paired Ok. Bodsy advised my that very few people can program the fob to switch between hot and cold, however if the heater is switched on when the ambient temperature is above 12 degrees or the engine is up to working temperature, then it will only ever blow out cold air and vice versa, if the engine is cold or the ambient tempt is below 12 degrees it will switch on the FBH.
I guess if you don't have either the fan or the heater coming on then it will be down to some settings you have missed out on....... 2010 RR 5.0 Autobiography
2020 F-Pace SVR
2018 RRSport
2015 Disco XXV
2011 Disco 3.0
2008 RRS HST V8
15th Oct 2016 1:55 pm
PDC
Member Since: 20 Jul 2016
Location: Warwickshire
Posts: 174
PeterTh wrote:
Forget my question. It is working now
Now low battery warning...
//Peter
That should be it, nothing works if the battery is low, it has to be in tip top condition for it to come on.2010 RR 5.0 Autobiography
2020 F-Pace SVR
2018 RRSport
2015 Disco XXV
2011 Disco 3.0
2008 RRS HST V8
15th Oct 2016 1:57 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73121
The 12c thing explains why I couldn't get the remote to do the heating remote fob thingie to do the heating cycle. All paired up and green LED doing it's thing properly.
Will give it a go tomorrow morning when hopefully a bit parky.
15th Oct 2016 2:04 pm
Aeromac
Member Since: 28 Jun 2011
Location: dublin
Posts: 46
Bodsy would you pm me with the payment details too please?
25th Oct 2016 4:34 am
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Ideas?
