Member Since: 05 Nov 2015
Location: Canterbury
Posts: 138
nip and tuck
Got the new lights on. Was just intending to line them up but couldn't get one of the bloody things out again without loosening the bumper. The new ones seem to have a lower lip that sits tight behind the top of the bumper. Anyway - looks good. Just can't drive when it's dark until they are activated!!
[URL=]
Click image to enlarge
[/URL]
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated
19th Mar 2016 7:44 pm
Robse
Member Since: 10 Jun 2014
Location: Cambridgeshire
Posts: 498
Very nice !! I'd like to do the same to mine when I can afford it !!Velar MY18 D180 S Narvik
Discovery MY2015 3.0 SDV6 SE Corris - Gone
19th Mar 2016 9:30 pm
dgardel
Member Since: 03 Nov 2009
Location: Greater Venice
Posts: 2025
is the installation plug and play or do you need same wire mods?
Let we know...Discovery 5 tdv6 HSE Corris Gray Outback Engineering Limited Edition IID Pro MV License
20th Mar 2016 4:42 am
etuna
Member Since: 05 Nov 2015
Location: Canterbury
Posts: 138
I've read wiring was needed for DRL but they worked out the box. Hoping it's just activation not wiring for the high/ dipped. Looks like no one has done this before which is surprising?
20th Mar 2016 7:26 am
lukeis
Member Since: 17 Mar 2016
Location: Sydney
Posts: 63
Hey guys
I bought a 2011 D4 last week and like the idea of doing the headlight upgrade (I did this on my last car which was a 2011 Freelander 2 and changed to the 2013 lights similar to the pic above)
My car looks like the usual D4 but doesn't have daytime running lights (I assumed they all did before buying one), I understand the wiring complications having been down this road before but can someone tell me if I buy the 2014/15 lights do they fit in?
I feel like they look to be different where they meet the Grill, so does that mean I need two lights and a new grill? what about the bumper/fenders?
21st Mar 2016 7:10 am
etuna
Member Since: 05 Nov 2015
Location: Canterbury
Posts: 138
You need a new grill but can use your old bumper (my photo above is 2015 lights and grill with 2011 bumper)
21st Mar 2016 7:12 am
lukeis
Member Since: 17 Mar 2016
Location: Sydney
Posts: 63
Thanks Etuna.
I'm not sure I'm ready for the job yet (money wise) but thats good news.. the FL2 wasn't so bad, but as the daytime running lights aren't as bright I didn't have to build in a dim for nighttime.
I have seen how bright the 2014/15 DRL can be and I'm not sure you could get away with having them on at night, did you wire it to dip yours or turn off the DRL at night?
21st Mar 2016 7:29 am
etuna
Member Since: 05 Nov 2015
Location: Canterbury
Posts: 138
What you see in the photo is plug and play (ie the DLRs which definitely aren't bright enough for night time driving) I'm having the Xenons activated today.
21st Mar 2016 7:32 am
lukeis
Member Since: 17 Mar 2016
Location: Sydney
Posts: 63
sorry, I re-read.. it looks like your not across that bridge yet.
let me re-edit..
So your last lights were halogen? did they have the 'fairy lights/drl"?
When you plug these in you get DRL only, not headlights or indicators? (thats what happened when I plugged the new FL2 DRL lights in, all the wires were mixed up)
Last edited by lukeis on 21st Mar 2016 7:35 am. Edited 1 time in total
21st Mar 2016 7:32 am
etuna
Member Since: 05 Nov 2015
Location: Canterbury
Posts: 138
Indicators and DLRs worked out the box (dip/ high beam xenons need activated). My oem lights were halogen with no fairy or DLR.
21st Mar 2016 7:34 am
lukeis
Member Since: 17 Mar 2016
Location: Sydney
Posts: 63
ok makes sense.. ignore my edited message above.
I thought the headlights (xenon) were supposed to come on but flicker if the wiring was in the same spot but the computer was still set at halogen?
21st Mar 2016 7:36 am
lukeis
Member Since: 17 Mar 2016
Location: Sydney
Posts: 63
how much did you pay for the lights can I ask?
I might have to follow you sooner than expected.. they look so good!
21st Mar 2016 7:38 am
etuna
Member Since: 05 Nov 2015
Location: Canterbury
Posts: 138
They do (or rather they flash once and go off) hence the fact I need to get them activated. : )
21st Mar 2016 7:38 am
etuna
Member Since: 05 Nov 2015
Location: Canterbury
Posts: 138
lukeis wrote:
how much did you pay for the lights can I ask?
I might have to follow you sooner than expected.. they look so good!
I bough them as a front end package but I suspect you'd pay £850- £1k for a set on their own. To be honest you could get halogens for about £550 that still have the DLRs
(All info I post in this thread needs peer reviewed and sanity checked as I'm feeling my way myself so don't take any of it as gospel)
21st Mar 2016 7:40 am
lukeis
Member Since: 17 Mar 2016
Location: Sydney
Posts: 63
I haven't checked but I'm fairly sure i have xenon's now (light looks white not yellow), I don't think I would go back to halogen so I'll keep my eyes peeled for a set of xenons instead.
Keep us posted after the activation tomorrow, that would be a great outcome if you can literally plug and play (assuming you are already on xenon).
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
