Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Technical (D3)

Reverse Parking Sensors and Towing
Post Reply  Down to end
Page 1 of 1
Rozzy1970
 


Member Since: 15 Aug 2013
Location: Warwickshire
Posts: 97

United Kingdom 2011 Discovery 4 3.0 SDV6 XS Auto Fuji WhiteDiscovery 4
Reverse Parking Sensors and Towing

Hi,
Towed my caravan for the first time since owning the D3, towed it a treat and forgot it was on the back until it came to reversing.
My head was pounding afterwards from the continual beeping when reversing down the drive.
Is there a mod that can be done to switch them off when towing?

Thanks.
  
Post #16224629th Mar 2016 2:34 pm
View user's profile Send private message View poster's gallery Reply with quote
Mogwyth
 


Member Since: 03 Oct 2014
Location: Pwllheli
Posts: 3976

Wales 2005 Discovery 3 4.4 V8 HSE Auto Zambezi SilverDiscovery 3

Assuming they are not aftermarket ones, They should deactivate automatically, mine do. And failing that there is a switch on the dash to turn them off.
 ==================================
05 D3 HSE V8 4.4
04 MG TF 135
03 MG TF 115 Cool Blue Edition
02 MG TF 160
00 Hymer B564 Lionheart
1971 Series III 109
 
 
Post #16224669th Mar 2016 2:42 pm
View user's profile Send private message View poster's gallery Reply with quote
Bodsy
Site Sponsor 


Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361

United Kingdom 2007 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3

i can enable it if yours hasnt been enabled. Will be going down the M40 next tuesday if that helps?
 Bodsys Brake Bible

D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling


Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here 
 
Post #16224689th Mar 2016 2:43 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Rozzy1970
 


Member Since: 15 Aug 2013
Location: Warwickshire
Posts: 97

United Kingdom 2011 Discovery 4 3.0 SDV6 XS Auto Fuji WhiteDiscovery 4

I presume they are factory fit, doesn't appear to be a switch on the dash, where should I be looking?

Thanks.
 2011 Discovery 4 XS in Fuji White
2008 Discovery 3 GS in Santorini
Lunar Delta TI Twin Axle 
 
Post #16224719th Mar 2016 2:48 pm
View user's profile Send private message View poster's gallery Reply with quote
Mogwyth
 


Member Since: 03 Oct 2014
Location: Pwllheli
Posts: 3976

Wales 2005 Discovery 3 4.4 V8 HSE Auto Zambezi SilverDiscovery 3

To the left of the hazard warning switch, doesn't disable them permanently, just temporarily
 ==================================
05 D3 HSE V8 4.4
04 MG TF 135
03 MG TF 115 Cool Blue Edition
02 MG TF 160
00 Hymer B564 Lionheart
1971 Series III 109
 
 
Post #16224849th Mar 2016 3:02 pm
View user's profile Send private message View poster's gallery Reply with quote
Rozzy1970
 


Member Since: 15 Aug 2013
Location: Warwickshire
Posts: 97

United Kingdom 2011 Discovery 4 3.0 SDV6 XS Auto Fuji WhiteDiscovery 4

Cheers Mogwyth,
I'll have another look later
 2011 Discovery 4 XS in Fuji White
2008 Discovery 3 GS in Santorini
Lunar Delta TI Twin Axle 
 
Post #16224959th Mar 2016 3:12 pm
View user's profile Send private message View poster's gallery Reply with quote
Rozzy1970
 


Member Since: 15 Aug 2013
Location: Warwickshire
Posts: 97

United Kingdom 2011 Discovery 4 3.0 SDV6 XS Auto Fuji WhiteDiscovery 4

Had another look, definitely no switch.
It it something that can be retro fitted would the cabling be there?
 2011 Discovery 4 XS in Fuji White
2008 Discovery 3 GS in Santorini
Lunar Delta TI Twin Axle 
 
Post #16226989th Mar 2016 9:11 pm
View user's profile Send private message View poster's gallery Reply with quote
farupp
 


Member Since: 29 Sep 2015
Location: Charleston SC USA
Posts: 33

United States 2008 LR3 4.4 V8 HSE Lux Auto Unknown ColourLR3

My 2008 LR3 has the switch to the left of the hazard warning switch as describe above. It a small round push button with a "P" imprinted on it. When I push it the warning signal is either deactivated or activated.

I am not familiar with the Disco 3 GS version so maybe mine is different than yours.
 Frank
2008 LR3 HSE
4.4 litre V8
Charleston, SC USA 
 
Post #162316010th Mar 2016 6:07 pm
View user's profile Send private message View poster's gallery Reply with quote
Rozzy1970
 


Member Since: 15 Aug 2013
Location: Warwickshire
Posts: 97

United Kingdom 2011 Discovery 4 3.0 SDV6 XS Auto Fuji WhiteDiscovery 4

It looks like there's a blanking plate where the switch should be between the Hazard switch and DSC button.

If I changed the top set of switches for one with the Parking button, is the wiring there to use the switch for rear parking sensors as I thought this was only for front sensors.
 2011 Discovery 4 XS in Fuji White
2008 Discovery 3 GS in Santorini
Lunar Delta TI Twin Axle 
 
Post #16510236th May 2016 12:54 pm
View user's profile Send private message View poster's gallery Reply with quote
audiobull
 


Member Since: 23 Apr 2016
Location: UK
Posts: 384

United Kingdom 

deleted
 

Last edited by audiobull on 3rd Jun 2016 7:32 pm. Edited 1 time in total 
Post #16510296th May 2016 1:00 pm
View user's profile Send private message View poster's gallery Reply with quote
WillyEckerslike
 


Member Since: 22 Aug 2013
Location: Out in the world
Posts: 967

2007 Discovery 3 TDV6 SE Auto Zambezi SilverDiscovery 3

There's just one wiring plug behind that panel. Just unplug old panel, plug in new.
  
Post #16510306th May 2016 1:02 pm
View user's profile Send private message View poster's gallery Reply with quote
Slimer
Site Moderator 


Member Since: 06 Jan 2005
Location: Last Exit to Nowhere
Posts: 16295

United Kingdom 

The switch does front & rear PDC if both are fitted. For some unknown reason they stopped fitting them as standard to later D3s if they only had rear fitted.
I may have a panel with the switch here somewhere that you can have for nominal fee, will have a look.

Have you got the LR tow sockets or aftermarket? If the LR ones you need a CCF update to tell the vehicle they're fitted then the rear sensors will automatically be disabled when a trailer's plugged in.
 The End  
Post #16510376th May 2016 1:07 pm
View user's profile Send private message View poster's gallery Reply with quote
Rozzy1970
 


Member Since: 15 Aug 2013
Location: Warwickshire
Posts: 97

United Kingdom 2011 Discovery 4 3.0 SDV6 XS Auto Fuji WhiteDiscovery 4

Cheers Slimer,
Only had the D3 for 3 months and towbar was already on, how can I tell if they are LR or not? Question
 2011 Discovery 4 XS in Fuji White
2008 Discovery 3 GS in Santorini
Lunar Delta TI Twin Axle 
 
Post #16510396th May 2016 1:13 pm
View user's profile Send private message View poster's gallery Reply with quote
Slimer
Site Moderator 


Member Since: 06 Jan 2005
Location: Last Exit to Nowhere
Posts: 16295

United Kingdom 

Fitting instructions are here, may help you identify if you've got the LR kit
 The End  
Post #16510496th May 2016 1:34 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site