Saltwaterjunk
Member Since: 18 Sep 2014
Location: Leerdam
Posts: 28
  
|
| Tow bar electrics - double plug |
|
I am looking to install a 13 pin and traditional connector on my 05 D3, which already had a 13 pin connector installed. That one broke due to a crappy adapter taking out some of the pins. Now I want to have the 13 pin in the right opening and a traditional one in the left opening. Is there a standard solution for this?
Regs
Harald Disco3 TDV6 2005
D4 MY 2014 rear led lights
i930 for reading error codes at night
|
 15th May 2016 1:34 pm |
|
|
Pesh
Member Since: 06 May 2016
Location: Hampshire
Posts: 84
 
|
Having just installed the electrics on my D3 it is so simple to complete, I'd just pull it all back out and re-feed the wiring through whichever hole you require.
Might just need to get yourself a few zip ties to replace clips of you break any during removal.
|
| 15th May 2016 1:48 pm |
|
|
Saltwaterjunk
Member Since: 18 Sep 2014
Location: Leerdam
Posts: 28
|
Is there an obvious point to cut into the 13 pin loom or should I find some harness that plugs straight into the car? Disco3 TDV6 2005
D4 MY 2014 rear led lights
i930 for reading error codes at night
|
| 15th May 2016 1:56 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10635
|
Interesting idea.
Options
1. I guess you will have to splice the 7 pin in, and solder the wires behind the bumper on the left side.
2. just use standard components, 7 core cable & socket and run the cable inside the car and connect it up there. (left side)
3. Depending on how old/rusty/cramped the 13 pin is, just run a loop of 7 core cable to that.
That has to be the simplest if it's not too rusty.
|
| 15th May 2016 9:37 pm |
|
|
