| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
James7759
Member Since: 06 Sep 2016
Location: Newcastle Upon Tyne
Posts: 20
  
|
| Am I heading down the right track? EGR Issues |
|
Just wanted to check my thinking is correct before I go in with 2 feet.
Mrs went to leave for work this morning, car started fine, went to pull away and as soon as she touched the throttle the yellow engine light came on and the car had no power so left the car on the drive and went to work.
I've come home, the car has very little power and revs slowly. I have Delphi loaded onto a toughbook so I have read the codes and got the following...
PO401 : Exhaust Gas Recirculation Flow Insufficent Deteced
Intermittent
PO489 : Exhaust Gas Recirculation Control Circuit Low
Intermittent
PO45D : Exhaust Gas RecirculationB Control Circuit High
Intermittent
So I am presuming this is EGR Valves? I have cleared the codes and floored the throttle, the engine is revving properly but chucked out plenty of black smoke.
So my question is this : Is this the EGR Valves? Would I be better off blanking them off? and can I blank them off I know there is an issue with later engines? Mine is a 2007 2.7 TDV6
Thanks in advance
|
 3rd Nov 2016 1:42 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
You'll need a software update to stop the EML coming on.
Black smoke is usually a split pipe or intercooler leak somewhere. But if they are the only fault codes, then could be egr stuck open and therefore egr blank would fix the reluctance to Rev.  Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 3rd Nov 2016 10:53 pm |
|
|
James7759
Member Since: 06 Sep 2016
Location: Newcastle Upon Tyne
Posts: 20
|
Managed to collect and fit an EGR blanking kit last night, no warning lights and engine runs great so fingers crossed thats sorted it.
|
| 4th Nov 2016 8:53 am |
|
|
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14111
|
hi
hope u don't mind me asking how long did it take to fit the egr blank please
thks
|
| 4th Nov 2016 12:24 pm |
|
|
James7759
Member Since: 06 Sep 2016
Location: Newcastle Upon Tyne
Posts: 20
|
It only took about 30 minutes. Passenger side was really easy drivers side took the time as it's harder to get at the exhaust end of the EGR. Careful you don't drop any bolts or they will be gone for ever.
|
| 4th Nov 2016 6:34 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
Rags down before you start avoids lost bolts/sockets. Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 4th Nov 2016 6:51 pm |
|
|
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14111
|
James7759 wrote:It only took about 30 minutes. Passenger side was really easy drivers side took the time as it's harder to get at the exhaust end of the EGR. Careful you don't drop any bolts or they will be gone for ever.
thks got the kit , just got to pluck up the courage to do it 
good idea about the rags, is always the way , there. or ally never to be seen again
until u drive up the road and hear the bolts hitting the road
|
| 4th Nov 2016 6:57 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
Plenty of penetrating fluid as the bolts can rust quite significantly. Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 4th Nov 2016 7:04 pm |
|
|
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14111
|
thks, that's the only bit that worries me, in getting the old ones out
going to wait for a half decent dry day but can't see many of them , seeing winter is here
|
| 4th Nov 2016 7:26 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
