IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
1st Jan 2017 11:21 am
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8243
Not yet they're still on the list, I've been waiting for two things and neither have come, Jan sales discount and cold weather It can when others can't,
It will when others won't,
It goes where others don't.
You've not have the cold nights we've had then, had some good frosts over here, but even at +2° It's nice to get in a warm car Altox GSM FBH controller thread
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
1st Jan 2017 1:01 pm
dgardel
Member Since: 03 Nov 2009
Location: Greater Venice
Posts: 2025
Also nice Altox web app where it is possible to define a "safety" area with SMS alarm when the car left the perimeter.
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
5th Jan 2017 5:13 pm
TinTapper
Member Since: 16 Aug 2016
Location: South Northants/Oxfordshire
Posts: 216
Greg, 0.6mm2 wiring should be OK right? Altox wires are 0.5mm (24AWG). Fuse wise, Halfords don't seem to do anything smaller than 3 amp so this might hold me up if I have to order off the net
The temp sensor is for fan applications is it not? Won't be needing that on a D3 just yet - any news on those modules?
You should be able to get a replacement lower amp fuse from a motorist store to replace the 3amp one, yes cable sounds ok, I used light gauge stuff as the power draw is really low, it only triggers things, not powers them
Temp sensor not any use in a D3 until fan module is out as they don't run the fans
TBH in a D4 I think the battery saver will kick the FBH out (user setting required temp to high), after about 30 mins of fans, my battery is on the limit of voltage shut down
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
5th Jan 2017 7:36 pm
TinTapper
Member Since: 16 Aug 2016
Location: South Northants/Oxfordshire
Posts: 216
5th Jan 2017 7:56 pm
Nickbys
Member Since: 04 Jan 2017
Location: Kent
Posts: 25
Locked mine out with a low fuel light on ffs, 30 odd pages later I now know what needs to be done
The next post will be my 3rd. Send me the details please.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
