Member Since: 02 Dec 2011
Location: Montreal
Posts: 745
Naks: Could you send me a screenshot by e-mail?
gstuart: You're welcome! Replacing the compressor or valve block will not affect the height measuring system thus not requiring a calibration http://www.gap-diagnostic.com/
24th Nov 2016 1:59 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14129
nice one pat
good to know
know the iid has already paid for itself , great bit of kit and good to also get great customer service
24th Nov 2016 2:16 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73081
Will have to go out & have a play. Once it warms up a bit.
24th Nov 2016 2:17 pm
philm
Member Since: 02 Oct 2016
Location: Manchester
Posts: 732
Just updated mine.
Cheers Pat.L633 Defender
Range Rover Velar-gone
Discovery 4 Landmark-gone
Gap IID Tool
24th Nov 2016 4:25 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
DSL wrote:
Will have to go out & have a play. Once it warms up a bit.
July then ??
24th Nov 2016 5:09 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73081
Probably.
24th Nov 2016 5:24 pm
gvw
Member Since: 16 Jan 2012
Location: South Yorkshire
Posts: 872
Quote:
Quote:
Father in law has a 2007 stype Jag - are there any future plans to cover this model of car?
Thanks
We do cover the basics on later Jags (XF, F-Type, XK...) but there are still items to be added. We will unfortunately not cover the S-Type due to its older electrical architecture.
Never mind its still a great bit of kit - keep up the good work
24th Nov 2016 9:18 pm
LRD414
Member Since: 27 Dec 2014
Location: Brisbane
Posts: 18
I have recently been beta testing with Gap to get battery live values for MY14 onwards.
These were shifted to the Gateway module around that time whereas in older models the BCM looks after the battery.
So initially the battery live values didn't work, showing as N/A in live values.
Pleased to report success for values such as alternator current/load and battery SoC.
See screenshot attached.
And thanks for excellent customer support Patrick.
Cheers,
Scott
Click image to enlarge
25th Nov 2016 9:23 am
Dudleydisco
Member Since: 20 Jun 2014
Location: York
Posts: 853
That's great news I've been talking to Pat about that too. Pleased to say that it works on my MY14 too - it's the thing I missed most when buying a newer vehicle - GAP do it again
Another thing I mentioned to Pat was the fact that the Number of keys programmed routine was VIN Locked. Obviously not a problem for those with the Pro version, but when buying my new (to me) D4 it would have been reassuring to know before I changed my IID licence over how many keys had been programmed to the new vehicle before I bought it. At least then I could have insisted that the vendor handed over the appropriate number of keys. Has anyone else got any opinions on that one?D4 MY14 XXV - RLD/IID BT
D4 MY13 HSE Lux - RLD/IID BT
P38 RR - Sad parting
110 - Even sadder parting
S3 88" - Still going strong after 23 years of ownership
25th Nov 2016 11:18 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14129
may i add a quick note please
to thank patrick for such fantastic customer service
always going that extra mile
25th Nov 2016 2:14 pm
geoff.
Member Since: 24 Jan 2010
Location: West kent
Posts: 8531
Gary
thats path of the course for Pat and the GAP team , always top service
25th Nov 2016 2:23 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14129
ur not wrong g there geoff, just make a refreshing change
done all my suspension under the guided control via the iid , very easy as said
sits all nice now , goes from access to off road in about 15-20 secs , well pleased
cam belts next , new year time
25th Nov 2016 10:36 pm
SumpNut
Member Since: 08 Feb 2016
Location: Derby
Posts: 35
I've plugged my IIDtool into my PC and checked with the IID tool updater - I cannot see any newer firmware than my custom no EGR map flash from BAS back in June/July time - is this correct?
Thanks
Daniel
28th Nov 2016 6:59 pm
treeiup
Member Since: 26 May 2015
Location: United Kingdom
Posts: 74
I'm trying to update mine but am getting OLE error code 0x80040154:class not registered. when I run the updater.... my06 D3
8th Dec 2016 8:20 am
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8225
Are you both using the latest updater?- if not delete the old updater and download the latest, won't do any harm regardless It can when others can't,
It will when others won't,
It goes where others don't.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
