Front or rear bearings? Fronts are easy, rears not so.
ARB bushes are cheap enough and simple to fit.
Spring? What spring? Air bag has a gater on it which might be split - which should be irrelevant for the mot - If that is it, just cut it off, its not required - though does keep some muck off it (The fronts don't have them)Mark.
2006, D3 SE Auto - gone but not forgotten.
2014 BMW 530d M Sport Tourer.
1977 Triumph Spitfire 1500
_________________________________________________
Disco Picture Website Here
9th Feb 2017 9:42 pm
ianb4310
Member Since: 22 Feb 2015
Location: Gainsborough
Posts: 513
From mot failed sheet
Reason(s) for failure
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
nearside rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
offside rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
nearside rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
offside rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
offside Front wheel bearing has excessive play (2.5.A.3c)
Advisory notice item(s)
nearside front Suspension arm has slight play in a pin/bush rear bush (2.4.G.2)
offside front Suspension arm has slight play in a pin/bush rear bush (2.4.G.2)D4 rear lights
Beanie grill
Dynachip remap
4x4 info
HSE Wheels
9th Feb 2017 9:46 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Did you notice the SRS warning light before it went in?
ARB bushes and drop-links are a DIY job.
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 22 Feb 2015
Location: Gainsborough
Posts: 513
No there was no lights on at all I thought that was strange?
I'm tied up with working away at moment so letting them do the workD4 rear lights
Beanie grill
Dynachip remap
4x4 info
HSE Wheels
9th Feb 2017 9:57 pm
ianb4310
Member Since: 22 Feb 2015
Location: Gainsborough
Posts: 513
They changed my air con rad before it went for mot could that have something to do with SRS lightD4 rear lights
Beanie grill
Dynachip remap
4x4 info
HSE Wheels
9th Feb 2017 10:06 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Could be, if they caught a wiring loom.
I do find it suspicious that a warning light on the dash appeared after you left it with them.Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 22 Feb 2015
Location: Gainsborough
Posts: 513
Thanks Robbie! Once triggered therefore setting the SRS off is it simply a matter of resetting the sensor via a iid or similar?D4 rear lights
Beanie grill
Dynachip remap
4x4 info
HSE Wheels
10th Feb 2017 9:54 am
countrywide
Member Since: 16 Sep 2007
Location: UK
Posts: 6019
If they disconnected them to change the rad and turned the ignition on before connecting them back, the warning light will come on. It should be possible to reset it with the correct kit.
10th Feb 2017 9:56 am
ianb4310
Member Since: 22 Feb 2015
Location: Gainsborough
Posts: 513
Turns out they had forgot to reconnect one after replacing air con rad !! Just the anti roll bushes etc nowD4 rear lights
Beanie grill
Dynachip remap
4x4 info
HSE Wheels
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum