Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Maintenance & Mods (D3)

Post Suspension Arm Replacement; Handling Changed?
Post Reply  Down to end
Page 1 of 1
Cresco750
 


Member Since: 20 Sep 2016
Location: Auckland, NZ
Posts: 49

New Zealand 2016 Discovery 4 3.0 SDV6 HSE Auto Santorini BlackDiscovery 4
Post Suspension Arm Replacement; Handling Changed?

Hi all

I've recently had the front lower suspension arms and rear suspension bushes replaced in my '05 D3. I have travelled about 2000km since they were fitted and I have noticed a tendency for the steering to occasionally pull ever so slightly when under braking or traveling on a less than perfect road surface. It's difficult to describe, but the feedback is similar to the jerk of the steering wheel when a front wheel is pulled off course by a rut or bump. It seems to make no difference what speed I'm doing, be it pulling up to traffic lights or at open road speed.
I never noticed this tendency before I had the work done. Is this just normal behaviour that was previously masked by worn and sloppy joints, or has the geometry been changed since the work was done?
The work was carried out by a very reputable LR specialist garage who do many of these replacements, and a full wheel alignment was done on completion.
Front brakes were also done approximately 3000km ago, and I didn't notice any change to handling then.

Regards
 2016 LR4 3.0 SDV6 HSE
SOLD: 2005 LR3 2.7 TDV6 HSE 
 
Post #180562620th Apr 2017 12:59 am
View user's profile Send private message View poster's gallery Reply with quote
Bodsy
Site Sponsor 


Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361

United Kingdom 2007 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3

Check tyre pressures, ride heights and get the wheel alignment done again.
 Bodsys Brake Bible

D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling


Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here 
 
Post #180569820th Apr 2017 9:40 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Cresco750
 


Member Since: 20 Sep 2016
Location: Auckland, NZ
Posts: 49

New Zealand 2016 Discovery 4 3.0 SDV6 HSE Auto Santorini BlackDiscovery 4

Thanks Bodsy, will do. For the uninitiated, is ride height something that I can easily check myself or does it require specialist equipment / expertise?
 2016 LR4 3.0 SDV6 HSE
SOLD: 2005 LR3 2.7 TDV6 HSE 
 
Post #180617821st Apr 2017 11:22 am
View user's profile Send private message View poster's gallery Reply with quote
caverD3
 


Member Since: 03 Jul 2006
Location: Oberon, NSW
Posts: 6922

Australia 2012 Discovery 4 3.0 SDV6 SE Auto Fuji WhiteDiscovery 4

you will need a tool eg iid or nanocom.
Can be done at dealers or indi.
 â€œThere are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely games”
Ernest Hemmingway
D4 3.0 Active Diff, Adaptive Lights, High Beam Assist, Surround Cameras, Privacy Glass.
D3 2.7:Adaptive Headlights,Electronic Rear Diff,ARB Bar,Blaupunkt Speakers,JVC Powered Subwoofer,Removable Snorkel,Mitch Hitch,Pioneer After Market Head Unit,Steering Wheel Control Adaptor,Remote Adjustable Supension Rod System, Taxside Dual Battery System. 
 
Post #180647022nd Apr 2017 1:46 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site