| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
dstevec
Member Since: 07 May 2017
Location: Dundee
Posts: 58
  
|
I'm attempting to hard wire the "new to me" disco 4 for a dash cam. Managed it with the old crv no problem, but when i went to get through the glove box to the fuse box i got stuck. I've read that there are clips on either side to let it flop down, but can't find them. Ended up reconditioning a slave cylinder on my yamaha xjr 1200 so i didn't have a complete wasted afternoon waiting on my new flappy paddle steering wheel arriving. (Which in the end didnt). So, does anyone have pics of the clips? Or a link? 
|
 9th May 2017 7:34 pm |
|
|
Luapno
Member Since: 27 Sep 2013
Location: Birmingham
Posts: 874
|
can't remember exactly but the curved hinges push either in or out wards (not too much force) which disconnect the from the runner and the glove box lid drops down When you are dead, you do not know you are dead. All of the pain is felt by others. The same thing happens when you are stupid.
|
| 9th May 2017 8:00 pm |
|
|
MrH
Member Since: 08 Aug 2007
Location: lost in the forest
Posts: 7754
|
Might be a bit obvious, but only the lower glove box has the curved hinges that allow access to the fuses etc, the upper one is somewhat more permanently fixed and requires more effort to remove, but it is possible.
Unfortunately, I haven't any electronic copies of the procedure for this but I'm sure someone one here will have access to topix and can get them for you. LRs are a fond memory, apart from the maintenance.
|
| 9th May 2017 8:18 pm |
|
|
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
|
I'm pretty sure you squeeze the curved hinge in towards the centre of the glove box to drop it down, after you've done it once it's dead easy. Just one note of caution though, don't close your door with the glovebox in the dropped position  Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
|
| 9th May 2017 8:51 pm |
|
|
Inigo
Member Since: 28 Feb 2012
Location: Kent
Posts: 299
|
If you grab each side of the open lower glovebox, the clips are behind each edge, about halfway up. I also find that something back there is greased, so I always have to wipe my hands to stop getting grease all over the trim.
|
| 9th May 2017 8:57 pm |
|
|
dstevec
Member Since: 07 May 2017
Location: Dundee
Posts: 58
|
Ah cheers. Yes i found the grease.....
|
| 10th May 2017 7:02 am |
|
|
FISHBOY
Member Since: 06 Sep 2010
Location: Kent
Posts: 754
|
Ha ha - so did I fitting my dash cam! Last of the D4 HSE...
|
| 10th May 2017 7:45 am |
|
|
dstevec
Member Since: 07 May 2017
Location: Dundee
Posts: 58
|
All sorted. Fitted in 20 mins ( this time) . Not including the 30 mins i had already spent looking for the clips!
|
| 10th May 2017 7:30 pm |
|
|
Soldierboy
Member Since: 27 Jan 2016
Location: Sheffield
Posts: 728
|
Would be interesting if someone could post a guide on hardwiring a dash cam in with photos and how the got the constant live feed without killing the battery I would be very grateful not mentioning countless others too  God created heavy armour on 06 sept 1916, on the 7th the devil stood to attention!
Fuji white D4 MY11 GS 3.0 SDV6 MODS:
SMD LEDS INSIDE, SIDE LIGHTS, REAR FOG AND REVERSE
OEM SIDE STEPS
STAINLESS STEEL SCUFF PLATES
RUBBER MATS
SHORT ROOF BARS
RETROFITTED CC
BLACK HUBS & DUST CAPS
GLOSS BLACK GRILLE, SIDE VENTS AND WHEELS
BLACK BADGES FRONT REAR AND STEERING WHEEL
MUD GUARDS FRONT AND REAR
GLOSS BLACK DOOR HANDLES AND LETTERING
|
| 10th May 2017 7:38 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
