Member Since: 30 Sep 2012
Location: bristol
Posts: 10
discovery 4 retrofit cruise control problems
hi there i have done a search on previous problems and nothing seems to cover it i have a pov spec 2010 d4 gs with no cruise control .So i have purchased a new wheel with cruise control buttons already fitted checked all connections etc i have programmed it with an iid tool pro and just can't seem to get it to work i always end up with the following message
i will email the guys at gap as i know there brilliant just wondering if anybody on here might know as at the time of composing this message it is currently a sunday morning and they won't be there thanks in advance
4th Jun 2017 8:23 am
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20841
Is the horn emblem white or the same colour as the switch?My D3 Build Thread
Member Since: 30 Sep 2012
Location: bristol
Posts: 10
yes the wheel has flappy paddles
ive had airbag back out to make sure all connections are right don't know if it can be seen but think this is the part number for the switches on that label how do i tell if the switches are right or wrong ?
4th Jun 2017 10:46 am
sportmonkey
Member Since: 30 Sep 2012
Location: bristol
Posts: 10
this is the numbers from the right hand side cruise control pack
4th Jun 2017 10:51 am
SHARKYSHARKS
Member Since: 20 Dec 2008
Location: Saddleworth Oldham
Posts: 1954
What setting did you change in the CCF ?
These are the settings I used when I did mine
IID TOOL MENU > CAR CONFIG > BCM BODY CONTROL > CRUISE CONTROL DISPLAY SET TO FULL PRIORITY.
IID TOOL MENU > CAR CONFIG > BCM BODY CONTROL > JAG CRIUSE CONTROL SET TO NORMAL
IID TOOLMENU > CAR CONFIG > BCM BODY CONTROL > CRUISE CONTROL AND VERIFY SET TO FITTED .
Hope this helps
SharkyMY18 D5 HSE LUX😎
MY12 Freelander SD4 HSE
44 Tonne 12 Litre 6x2 Scania T cab (Current)
Freelander 1 (Wrote off 😫)
Ex D1
Ex D2 GS
Ex V8 D2 GS
Ex D3 S
Ex D4 GS
Club skip ya lockers !!!
Club BAS remote heater !!
Club Duratrac
Club Phillips DRL
Club Prospeed Rack Mk 1
Club Prospeed Rack Mk 2
Club Sankey
Club RLD spare wheel protector
4th Jun 2017 12:54 pm
Soldierboy
Member Since: 27 Jan 2016
Location: Sheffield
Posts: 728
Sounds daft but try disconnecting the battery and doing a hard reset with ccf files set correctly worked for me if not it's definitely the switches God created heavy armour on 06 sept 1916, on the 7th the devil stood to attention!
Fuji white D4 MY11 GS 3.0 SDV6 MODS:
SMD LEDS INSIDE, SIDE LIGHTS, REAR FOG AND REVERSE
OEM SIDE STEPS
STAINLESS STEEL SCUFF PLATES
RUBBER MATS
SHORT ROOF BARS
RETROFITTED CC
BLACK HUBS & DUST CAPS
GLOSS BLACK GRILLE, SIDE VENTS AND WHEELS
BLACK BADGES FRONT REAR AND STEERING WHEEL
MUD GUARDS FRONT AND REAR
GLOSS BLACK DOOR HANDLES AND LETTERING
4th Jun 2017 1:52 pm
sportmonkey
Member Since: 30 Sep 2012
Location: bristol
Posts: 10
yes used same settings and have disconnected battery and reset when i took airbag out is there any way of testing the switches to see if there faulty ?
4th Jun 2017 2:18 pm
Soldierboy
Member Since: 27 Jan 2016
Location: Sheffield
Posts: 728
Not that I know of it's all on the year of the switch pack I'm afraidGod created heavy armour on 06 sept 1916, on the 7th the devil stood to attention!
Fuji white D4 MY11 GS 3.0 SDV6 MODS:
SMD LEDS INSIDE, SIDE LIGHTS, REAR FOG AND REVERSE
OEM SIDE STEPS
STAINLESS STEEL SCUFF PLATES
RUBBER MATS
SHORT ROOF BARS
RETROFITTED CC
BLACK HUBS & DUST CAPS
GLOSS BLACK GRILLE, SIDE VENTS AND WHEELS
BLACK BADGES FRONT REAR AND STEERING WHEEL
MUD GUARDS FRONT AND REAR
GLOSS BLACK DOOR HANDLES AND LETTERING
4th Jun 2017 3:10 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20841
sportmonkey wrote:
yes the wheel has flappy paddles
ive had airbag back out to make sure all connections are right don't know if it can be seen but think this is the part number for the switches on that label how do i tell if the switches are right or wrong
2012 and newer switches are not compatible with the early cars...
They are fine, and will work in newer cars, just not yours My D3 Build Thread
Member Since: 30 Sep 2012
Location: bristol
Posts: 10
the guy i bought it from seemed to think it was from a 2010 but in hindsight it can't be can it as it has flappy paddles on .So i need to order another switch pack ?how will i know which is the right one for my 2010 though ?does anyone have one on here ?
thanks
4th Jun 2017 3:47 pm
Jameshutchisparks
Member Since: 20 Jun 2017
Location: Leeds
Posts: 5
Hi, I don't suppose you still have the controls, I've got a 2012 d4 commercial that I'd like to upgrade.
James
28th Jun 2017 8:40 am
dgardel
Member Since: 03 Nov 2009
Location: Greater Venice
Posts: 2025
sportmonkey wrote:
the guy i bought it from seemed to think it was from a 2010 but in hindsight it can't be can it as it has flappy paddles on .So i need to order another switch pack ?how will i know which is the right one for my 2010 though ?does anyone have one on here ?
thanks
Yes, as Disco Mickey underlined you have the incorrect switch packs.....
No Flappy on 2010 Discos.... Flappy was installed with the 8 speed ZF (2012)
But keep the flappy with you, you can add to yours using GAP gearbox SW patch (I done it on my MY2011)Discovery 5 tdv6 HSE Corris Gray Outback Engineering Limited Edition IID Pro MV License
28th Jun 2017 11:27 am
sportmonkey
Member Since: 30 Sep 2012
Location: bristol
Posts: 10
Got it working now thanks bought complete new wheel again with matching switch packs all good now
I do have the iid tool and am am just debating wether to do the flappy paddle upgrade would you say it's worth it what advantage does it give you other than you can ??
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
