Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
nigelpugh
Member Since: 31 Jan 2005
Location: West Midlands , UK close to LR Solihull!!
Posts: 215
|
PDC Not Working - No Errors or Flashing PDC Light - Fuse? |
|
Hi Guys,
My PDC, both front and rear has stopped working completely.
The light on the PDC switch does not come on going into reverse, or by pressing the switch manually.
There are no tones or errors.
The rear camera ans screen are working fine though.
However interestingly the option to switch on distance sensing overlay for the rear camera is in the menu but does not overlay on the screen when selected.
I suspect the PDC ECU is dead, or has no power, but cant find a fuse relating to it.
Any one have an idea what fuse i might need to check please?
Ive tried all the ones that might also be supplying the PDC, but they all check out ok.
Any advice welcomed.
My car is a 2014 MY HSE Luxury.
Thanks.
Nigel. Nige - 2014 Disco 4 TDV6 HSE Luxury - Scotia Grey
|
23rd Jun 2017 11:28 am |
|
|
nigelpugh
Member Since: 31 Jan 2005
Location: West Midlands , UK close to LR Solihull!!
Posts: 215
|
I can't believe im the only one to have this issue?
Any feedback on anything welcome !!
Thanks. Nige - 2014 Disco 4 TDV6 HSE Luxury - Scotia Grey
|
23rd Jun 2017 6:20 pm |
|
|
Dannyson
Member Since: 15 Oct 2014
Location: Newquay, Cornwall
Posts: 820
|
PDC? 2016MY Discovery HSE - Black
2009MY Toyota Land Cruiser (Lc4) - Black
|
23rd Jun 2017 10:48 pm |
|
|
nigelpugh
Member Since: 31 Jan 2005
Location: West Midlands , UK close to LR Solihull!!
Posts: 215
|
PDC = Park Distance Control.
Front and rear parking sensors.
Hope that helps. Nige - 2014 Disco 4 TDV6 HSE Luxury - Scotia Grey
|
24th Jun 2017 7:25 am |
|
|
nigelpugh
Member Since: 31 Jan 2005
Location: West Midlands , UK close to LR Solihull!!
Posts: 215
|
Update on this situation, as no one has commented or offered advice.
Plugged in diagnostics which came up,with a lot of fault messages, including Comms lost to PDC control u it.
So Today we took Front and rear off side and near side light units out to isolate the front and rear looms to see if it was a trapped cable fault.
It made no difference at all, when disconnecting the front or rear PDC looms.
We then took a look at the PDC control unit in the rear passenger door frame area.
It looks fine, no marks or corrosion on the connectors, and a quick look inside revealed it had no dry joints or burn marks.
Does anyone know if we can test this unit on its own? Of course will check again that it has a power feed.
Any other advice welcome, but as no one is commenting I guess i am on my own with this issue on a MY14 car. Nige - 2014 Disco 4 TDV6 HSE Luxury - Scotia Grey
|
26th Jun 2017 9:20 pm |
|
|
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3169
|
It sounds as though the system is no longer communicating with the control unit do you know anyone close with the same car so you could possibly swap the unit to see if it corrects it Discovery 3 se gone
Range rover sport supercharged here:)
|
27th Jun 2017 8:46 am |
|
|
|
Posting Rules
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.