Member Since: 28 May 2014
Location: Belfast
Posts: 496
4.4 V8 fuel temperature sensor
Recently, while checking the faults logged on my D3, I went into the instrument setting on the Nanocom Evo and noticed that there was no temperature reading from the Fuel temperature sensor. I was wondering if anyone else out there, with a 4.4 V8 and Nanocom, has checked their readings has found this.
If BBS Spy or one of his colleges is about, could they confirm if I should be getting a reading for this. I'm trying to determine if mine is faulty.
Thanks in advance for any help.
10th Dec 2017 7:47 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10379
Diesels have one.
Not sure if required on petrol
10th Dec 2017 8:54 pm
Alphamale
Member Since: 28 May 2014
Location: Belfast
Posts: 496
We do have one Pete, attached to the fuel rail, but the Nanocom doesn't appear to be seeing it. It could be that for the 4.4 that's fine and the same list is used for diesels when it would give a reading.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum