Member Since: 28 May 2007
Location: Cheshire
Posts: 282
Unplugging Power Connector
Just a simple question, how do you get this connector off? If it just an "interference" fit? I can't see any clips that need pressing in and mine is not budging, a bit of an issue when I think it needs a clean up.2011 D4 SDV6 HSE
2008 D3 TDV6 HSE
2005 D3 V8 SE - left in Oz..
9th Jan 2018 11:41 am
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4520
Not sure what connector you mean? Have you got a photo?Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
9th Jan 2018 11:48 am
mark the spark
Member Since: 22 Jun 2011
Location: southampton
Posts: 2521
if you mean the main electrical connector to the fbh with the concertina rubbery bit then yes from memory there are 2 clips from a memory from a few years back i think its a real fiddly one and i think 2 small watchmaker size screwdrivers and swearing was involvedMY05 SE D3 Manual my first LR what a car
MY10 HSE D4 auto
MY14 XXV more buttons than the spaceshuttle
9th Jan 2018 12:11 pm
Marmoset
Member Since: 28 May 2007
Location: Cheshire
Posts: 282
That's probably it Mark, much swearing has already been thrown at the thing!
Its Connector C0926 in the photo 2/3 of the way down this guide.
Member Since: 22 Jun 2011
Location: southampton
Posts: 2521
sorry i was referiing to C0925 i didnt remove C0926 when i tied in the fbh remote
so best someone else advisesMY05 SE D3 Manual my first LR what a car
MY10 HSE D4 auto
MY14 XXV more buttons than the spaceshuttle
I wouldn’t bother I ended up snapping mine it only powers the coolant pump do doesn’t need to be removed in order to remove from the car have you already started removing the unit thenRange Rover Westminster 4.4 TDV8 what a car
Discovery 3 HSE 2006 gone but never forgotten
Member of the 234,567 mile club😎
9th Jan 2018 6:36 pm
zinke
Member Since: 22 Feb 2014
Location: Scunthorpe
Posts: 584
It says it the link to the picture of the plug above that you can use your key to help remove he plug. Remember when trying to release the clip on the plug to push the whole plug in as you try to release the clip.
Pete.IID, webasto software and workshop facility's available.
9th Jan 2018 7:36 pm
Marmoset
Member Since: 28 May 2007
Location: Cheshire
Posts: 282
Thanks all, it's just started working more regularly since I got an elbow to connect the coolant pipes with so I can remove it from the vehicle! Perhaps a few cold mornings have woken it up properly?2011 D4 SDV6 HSE
2008 D3 TDV6 HSE
2005 D3 V8 SE - left in Oz..
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum