craig_bennett
Member Since: 05 Oct 2012
Location: Bristol
Posts: 52
  
|
| FBH diag lead/software help ??? |
|
so I have baught the vagcom lead (the blue ebay one) and the vagcom software dosnt open ?
any ideas ? or anyone got a link to get working software ?
I did manage to download vccs (apparantly a newer version of vagcom) but that dosnt see the cable either. I have changed the com port number and installed the cable drivers (windows 7)
Thanks craig.
|
 17th Mar 2018 7:05 pm |
|
|
Martin
Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18573
|
Why are you trying to use the VW software? 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
|
| 17th Mar 2018 7:07 pm |
|
|
craig_bennett
Member Since: 05 Oct 2012
Location: Bristol
Posts: 52
|
Thanks for the reply. So do I not need the vag software, just the vag cable and the drivers for the cable then use the webasto software ? craig.
|
| 17th Mar 2018 7:12 pm |
|
|
|
|
craig_bennett
Member Since: 05 Oct 2012
Location: Bristol
Posts: 52
|
Tanks have read that, I will have another try soon (my laptop died when I took it outside.) craig.
|
| 17th Mar 2018 7:17 pm |
|
|
craig_bennett
Member Since: 05 Oct 2012
Location: Bristol
Posts: 52
|
After several failed starts when using the car last night, I plugged in today, reset the fbh and turned it on with the software and ran it up to 50 degrees and then started the car streight up at -3 (it wont usually start below 0 as the glow plugs are dead). so I will have to see if it fails to start when the car wants it to but it does run when the software is telling it to. finger crossed it behaves now, hopefully I can get a fbh controller fitted then. craig.
|
| 18th Mar 2018 12:53 pm |
|
|
