I want it for the weekend really as I am changing disks and pads.
20th Mar 2018 2:00 pm
Space Cadet
Member Since: 05 Dec 2017
Location: Ingatestone
Posts: 266
Thanks mate, good spot!
Will just double-check the size of my jack hole tonight and all being well will order one.
(So is it Beretta, as in Silver-Pigeon?)
20th Mar 2018 4:18 pm
Beretta
Member Since: 11 Oct 2012
Location: Rochdale
Posts: 1180
Unfortunately not, Beretta is my boats name and it was free on here so stuck with that. She was called Beretta by the previous owner, and I did a load of work in Italy that helped pay for her - so the name stuck.
They do make some nice bits of 'equipment' though....
20th Mar 2018 4:22 pm
Space Cadet
Member Since: 05 Dec 2017
Location: Ingatestone
Posts: 266
Well that sounds an even better, and more sentimental, reason for the name!
I only shoot a couple of times a year but always end up using Silver-Pigeons, I don’t know enough about other makes but the SP’s are lovely guns and seem to be good quality but relatively inexpensive.
20th Mar 2018 4:31 pm
Space Cadet
Member Since: 05 Dec 2017
Location: Ingatestone
Posts: 266
My 2 tonne Clark jack only has a 22mm wide hole therefore the adapter (with a 30mm base) wouldn’t fit, I will send them an e-mail to see if they can do a one-off for me though.
21st Mar 2018 10:01 am
Beretta
Member Since: 11 Oct 2012
Location: Rochdale
Posts: 1180
Just to update, the ebay special works fine and fits the SGS OK.
I took delivery of my SGS jack (TJ3) on Friday, it certainly is a beast.
i was looking for a D3 jack adaptor & have got a bit confused. The cup on my jack is 8 sided rather than circular like the others i've seen on here. When I remove the retainer in the middle of the cup it leaves a 20.5mm threaded hole. I can't see anything on the usual auction site that will fit it. Most seem to have a 16mm point, 60mm body & a 30mm base to drop into the jack.
Any ideas?
Click image to enlarge
Cheers NickMY16 D4 Landmark SDV6 (The Ice Maiden)
Uncle Ray's spare wheel protector
MY08 D3 HSE Stornoway (Miss Moneypit) The money tree withered......
22nd Apr 2018 11:08 am
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
Are you sure that's a TJ3? I've just taken delivery of one this week and mines a TJ3 but has a different saddle arrangement to yours
Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
Mines the LP version, I went for it because of the slightly higher lift spec.
Click image to enlarge
Seems I've slipped up & ordered one that won't take the jack adaptor. I didn't realise they differed between the standard & low profile version
Cheers Nick MY16 D4 Landmark SDV6 (The Ice Maiden)
Uncle Ray's spare wheel protector
MY08 D3 HSE Stornoway (Miss Moneypit) The money tree withered......
22nd Apr 2018 6:19 pm
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
I've just been looking at the SGS website, is yours a low profile one? The low profile one is a TJ3LP and it looks from the photo to have an octagonal pad, if it is, the normal jack adaptor wont fit as you have already found out Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
22nd Apr 2018 6:19 pm
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
Whops I didn't see that you had replied Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum